PRE CUT CLEAR BRA PAINT PROTECTION FILM FOR: Acura NSX (2018-2021)
PRE CUT KIT COVERAGE: Front Bumper and Headlights
Designed to protect automotive paint on fenders, bumpers and
deck or side skirts.
High Quality, German made ORAFOL Brand.
6 mil Clear Gloss PVC Laminate/Paint Protection Film.
5 Year outdoor durability.
Wet application is recommended when installing as a paint
protection film, dry if used as a laminate.
Highly Recommend Professional Installer for best results.
Great for flat to moderate curved surfaces.
Reverse Wound with liner side facing out to prevent
scratching of the laminate surface.
Uninstalling Oraguard 270g will not damage your vehicle's
paint.
Each piece of the PPF kit is precisely cut to form fit your vehicle but will require about a 10% tension stretching to the sides to conform to the body.
Our PPF kits are cut to order and may take up to 5 business
days to ship out.
INSTALLATION INSTRUCTIONS
Procedure: To achieve an optimum result, thoroughly clean the base
before applying the ORAGUARD®- stone guard protective film.
You will also need to Stretch the material about 10% to get a complete form fit.
Cleaning the base: The vehicle base should generally be cleaned with
conventional cleaning agents. Do not use substances attended to form a coating
or sealing layer by means of nanotechnology on the base to be cleaned.
a) Clean the vehicle on the day before in a car wash tunnel
(brush washing – no hand washing!) b) Thoroughly check surfaces and edges for residues of
preservative wax or polishing agents and remove them with industrial cleaning
agents or silicone remover (isopropanol alone is not effective). c) Finally, the surfaces to be bonded must always be cleaned
with isopropanol. This will remove most efficiently all residues of previously
used cleaning agents (spirit is not recommended). d) Thoroughly dry the vehicle, use hot air blower to remove
any residual moisture, particularly moisture trapped under rubber seals.
Note: Solvent residues owing to improper cleaning or a recent
paint job may result in blisters forming between the film and the base and
affect adherence. Make sure that films are only bonded to completely dry and
hardened coating finishes. As a rule of thumb, allow a minimum drying period of
three weeks.
How to correctly apply ORAGUARD® Stone Guard Film - YouTube
Video will open in a new window Using the eBay App? Paste link into a browser window: