CPU
|
- Support for 7th/6th
Generation Intel® Core™ i7 processors/Intel® Core™
i5 processors/ Intel® Core™ i3 processors/Intel®
Pentium® processors/ Intel® Celeron®
processors in the LGA1151 package
* For 7th Generation Intel® Core™ processors
support need to update the latest BIOS. - L3 cache varies with CPU
(Please
refer "CPU Support List" for more information.)
|
Chipset
|
Intel® Z170
Express Chipset
|
Memory
|
- 4 x DDR4 DIMM sockets
supporting up to 64 GB of system memory
* Due to a Windows 32-bit operating system limitation, when more than 4
GB of physical memory is installed, the actual memory size displayed
will be less than the size of the physical memory installed. - Dual channel memory
architecture
- Support for DDR4 3466(O.C.)
/3400(O.C.) /3333(O.C.) /3300(O.C.) /3200(O.C.) /3000(O.C.) /2800(O.C.)
/2666(O.C.) /2400(O.C.) /2133 MHz memory modules
- Support for ECC UDIMM 1Rx8/2Rx8
memory modules (operate in non-ECC mode)
- Support for non-ECC UDIMM
1Rx8/2Rx8/1Rx16 memory modules
- Support for Extreme Memory
Profile (XMP) memory modules
(Please
refer "Memory Support List" for more information.)
|
Onboard Graphics
|
Integrated
Graphics Processor-Intel® HD Graphics support
- 1 x D-Sub port, supporting a
maximum resolution of 1920x1200at60 Hz
- 1 x DVI-D port, supporting a
maximum resolution of 1920x1200at60 Hz
* The DVI-D port does not support D-Sub connection by adapter. - 1 x HDMI port, supporting a
maximum resolution of 4096x2160at24 Hz
* Support for HDMI 1.4 version. - Support for up to 3 displays at
the same time
- Maximum shared memory of 1024
MB
|
Audio
|
- Realtek® ALC1150
codec
- TI Burr Brown®
OPA2134 operational amplifier
- Support for Sound Blaster X-Fi
MB3
- High Definition Audio
- 2/4/5.1/7.1-channel
- Support for S/PDIF Out
|
LAN
|
Killer E2201 LAN chip
(10/100/1000 Mbit)
|
Expansion Slots
|
- 1 x PCI Express x16 slot,
running at x16 (PCIEX16)
* For optimum performance, if only one PCI Express graphics card is to
be installed, be sure to install it in the PCIEX16 slot. - 1 x PCI Express x16 slot,
running at x8 (PCIEX8)
* The PCIEX8 slot shares bandwidth with the PCIEX16 slot. When the
PCIEX8 slot is populated, the PCIEX16 slot will operate at up to x8
mode. - 1 x PCI Express x16 slot,
running at x4 (PCIEX4)
* The PCIEX4 slot shares bandwidth with the PCIEX1_3 slot. When the
PCIEX1_3 slot is populated, the PCIEX4 slot will operate at up to x1
mode. - 3 x PCI Express x1 slots
(All of the PCI Express slots conform to PCI Express 3.0 standard.)
|
Storage Interface
|
Chipset:
- 2 x M.2 Socket 3 connectors
(Socket 3, M key, type 2242/2260/2280 SATA & PCIe x4/x2/x1 SSD
support)
- 3 x SATA Express connectors
- 6 x SATA 6Gb/s connectors
- Support for RAID 0, RAID 1,
RAID 5, and RAID 10
* Refer to "1-9 Internal Connectors," for the supported
configurations with the M.2, SATA Express, and SATA connectors.
|
Multi-Graphics Technology
|
- Support for NVIDIA®
Quad-GPU SLI™ and 2-Way NVIDIA® SLI™ technologies
- Support for AMD Quad-GPU
CrossFireX™ and 3-Way/2-Way AMD CrossFire™ technologies
|
USB
|
Chipset:
- 7 x USB 3.0/2.0 ports (3 ports
on the back panel, 4 ports available through the internal USB headers)
- 6 x USB 2.0/1.1 ports (2 ports
on the back panel, 4 ports available through the internal USB headers)
Chipset+Intel®
USB 3.1 Controller:
- 1 x USB Type-C™ port on the
back panel, with USB 3.1 support
- 1 x USB 3.1 Type-A port (red)
on the back panel
|
Internal I/O Connectors
|
- 1 x 24-pin ATX main power
connector
- 1 x 8-pin ATX 12V power
connector
- 2 x M.2 Socket 3 connectors
- 3 x SATA Express connectors
- 6 x SATA 6Gb/s connectors
- 1 x CPU fan header
- 1 x water cooling fan header
(CPU_OPT)
- 3 x system fan headers
- 1 x front panel header
- 1 x front panel audio header
- 1 x S/PDIF Out header
- 2 x USB 3.0/2.0 headers
- 2 x USB 2.0/1.1 headers
- 1 x Trusted Platform Module
(TPM) header
- 1 x Thunderbolt™ add-in card
connector
- 1 x serial port header
- 1 x Clear CMOS jumper
- 1 x audio gain control switch
|
Back Panel Connectors
|
- 1 x PS/2 keyboard/mouse port
- 1 x D-Sub port
- 1 x DVI-D port
- 1 x HDMI port
- 1 x USB Type-C™ port, with USB
3.1 support
- 1 x USB 3.1 Type-A port (red)
- 3 x USB 3.0/2.0 ports
- 2 x USB 2.0/1.1 ports
- 1 x RJ-45 port
- 1 x optical S/PDIF Out
connector
- 5 x audio jacks
(Center/Subwoofer Speaker Out, Rear Speaker Out, Line In, Line Out, Mic
In)
|
I/O Controller
|
iTE® I/O
Controller Chip
|
H/W Monitoring
|
- System voltage detection
- CPU/System/Chipset temperature
detection
- CPU/CPU OPT/System fan speed
detection
- CPU/System/Chipset overheating
warning
- CPU/CPU OPT/System fan fail
warning
- CPU/CPU OPT/System fan speed
control
* Whether the fan speed control function is supported will depend on the
cooler you install.
|
BIOS
|
- 2 x 64 Mbit flash
- Use of licensed AMI UEFI BIOS
- Support for DualBIOS™
- PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0
|
Unique Features
|
- Support for APP Center
* Available applications in APP
Center may vary by
motherboard model. Supported functions of each application may also vary
depending on motherboard specifications.
3D OSD
atBIOS
Ambient LED
AutoGreen
Cloud Station
EasyTune
Easy RAID
Fast Boot
Smart TimeLock
Smart Keyboard
Smart Backup
System Information Viewer
USB Blocker - Support for Q-Flash
- Support for Smart Switch
- Support for Xpress Install
|
Operating System
|
- Windows® 10 64-bit
(for 7th Generation Intel® Processors)
- Windows® 10 64-bit /
Windows® 8.1 64-bit / Windows® 7 32-bit / 64-bits
(for 6th Generation Intel® Processors)
* Please download the "Windows USB Installation Tool" from
GIGABYTE's website and install it before installing Windows 7.
|
Form Factor
|
ATX Form Factor; 30.5cm x 23.5cm
|
Remark
|
Due to different Linux support condition
provided by chipset vendors, please download Linux driver from chipset
vendors' website or 3rd party website.
Most hardware/software vendors may no
longer offer drivers to support Win9X/ME/2000/XP. If drivers are available
from the vendors, we will update them on the GIGABYTE website.
|