SUZUKI DR650se 

Suzuki DR650 SE-T,V,W,X,Y,K1-K9,L0-L9,M0 — USA

  

Complete  Premium  JT 520 Conversion Chain & Sprockets Kit 

(oem quality scm420 chromoly Japan steel alloy front , c49 high carbon steel rear) and
 a Premium High Strength JT 520  X-Ring chain in GOLD or SILVER


NOTE:
Includes a RIVET type master link and a CLIP type master link with a SILVER X-Ring Chain Kit
                                                  or
Includes a CLIP type master link ONLY with a GOLD X-Ring Chain Kit (NO RIVET LINK AVAILABLE WITH GOLD CHAIN!)

 Rated for up to 750cc modern era multi-cylinder street bike horsepower! 


Available Ratio's in this kit:  520 Conversion pitch gearing sizes

JT 15(oem) tooth Front &  42(oem) tooth Rear Sprocket for DR650 Exact OEM Ratio

JT 15(oem) tooth Front &  41(-1t)    tooth Rear Sprocket for DR650 Mild Freeway Ratio 

JT 14(-1t)    tooth Front &  42(oem) tooth Rear Sprocket for DR650 Quick Acceleration Ratio (most versatile)

JT 15(oem) tooth Front &  44(+2t)   tooth Rear Sprocket for DR650 Mild Quick Acceleration Ratio

JT 15(oem) tooth Front &  45(+3t)   tooth Rear Sprocket for DR650 Quick Acceleration Ratio

JT 14(-1t)    tooth Front &  44(+2t)   tooth Rear Sprocket for DR650 Extreme Quick Accel. Ratio (-1/+2 mx/hill climb)

NOTE; If any alternate sizes show as not available in inventory, call or contact RPE Motorcycle, as they are likely now available.        


On Sale NOW, with..*FREE SHIPPING!!

Also available in optional gear ratios  ...at no extra charge. 

  RPE Motorcycle in Whittier, CA  to special order.

RPEcycle.

This advertised kit includes 520 pitch conversion chain and sprockets, which are 2mm narrower than DR650 oem 525 pitch.
Less material equals less rotating mass and less overall weight.
520 Pitch is widely used on all 125/250 and 450 MX bikes and racing motorcycles.
520 is OEM on all DRZ400 models, including street and dirt models.


For Exact OEM DR650se gear ratio...   use a 15t tooth Front Sprocket /42t Rear
OEM Ratio is the Factory Suzuki Calculated best all around gearing, with the least amount of compromise on top end or bottom end acceleration


For Mild Freeway gear ratio (slightly lower top gear cruising rpm's, slightly higher top speed), use a 15 tooth front /41t Rear Sprocket
Your usual  highway speed cruising rpm's will be slightly lower than with stock gearing, and top speed will be slightly higher.


For QUICK  ACCELERATION gear ratio (quicker off the line, quicker roll on's), use a 14 tooth front/42t Rear Sprocket
(the -1t front sprocket change is versatile because you can change to the stock ratio size 15t with same chain,
Your highway speed cruising rpm's will be slightly higher than with stock gearing, and top speed will be reduced.



For QUICK  ACCELERATION gear ratio (quicker off the line, quicker roll on's), use a 15 tooth front / 44t or 45t Rear Sprocket
Your highway speed cruising rpm's will be slightly higher than with stock gearing, and top speed will be reduced. Larger turning radius with 15t is better for drive chain wear. 15/45t is the same ratio as 14/42t

For EXTREME QUICK  ACCELERATION gear ratio (Hill Climbs, MX track ratio), use a 14 tooth front / 44t or 45t Rear Sprocket
Your highway speed cruising rpm's will be MUCH higher than with stock gearing, and top speed will be GREATLY reduced. Larger turning radius with 15t is better for drive chain wear. 14/45t is the same ratio as 15/48t
(the -1t front sprocket change is versatile because you can change to the stock ratio size 15t with same chain,


JT Ft. Sprocket available in 520 x 14 and 15 teeth

JT Rr. Sprocket available in 520 x 41, 42 , 44 and 45 teeth

* call RPE Motorcycle for availability of alternate 46t+ sprocket sizes not listed here to special order


Original Factory Supplied OEM size sprockets are the calculated "Happy Medium" of off the line acceleration, roll on's, and reasonable high speed engine rpm's with the least amount of compromise on either top end or low end acceleration.

 
 This Kit includes a RIVET type master link and a CLIP type master link when a SILVER chain is selected,
 otherwise, a Gold Chain comes with ONLY a CLIP Type master Link


RPE Motorcycle
10725 Beverly Blvd, Whittier, CA 90601


Will Calls and Installation Appointments Welcome!

 Hours: Monday-Friday = 10am-6pm   (Pacific Std. Time)


We accept Visa, Master Charge, Discover, American Express, Paypal, Applepay