Technical Parameters:

Light Source: Broad Band LED;

Wavelength Range: 385 - 515 nm;

Light Intensity: > 2300mW / cm²;

Battery: Lithium-ion battery (total running time when the battery is fully charged: at least 80 minutes);

Power Input Power: AC 100-240V 50 / 60Hz;

Charging time: about 45 minutes;

Size:Handle: Φ20 mm × 240 mm;

Charging stand: Φ63 mm × 30 mm (all of the above are the largest size)

Weight: Handle: 96 grams;

Charging seat: 99 grams;

Operating ambient temperature: + 10℃ - + 40℃(+ 50 °F - + 70°F);

Operating relative humidity: 30% - 75%;

Operating environment pressure: 700hPa - 1060hPa;

Package Contents:

1 × host handle;

1 × charging base;

1 × power ;

1 × user manual.

Operation and function description:

The entire handle is only one button, light built-in button.

1. For the first time, charge the light curing handle first. the USB cable of the charger into the USB port of the power , the power into the power socket, and finallyPut the handle on the charging stand; or, insert the USB cable of the charging stand into the USB port of the computer, and then put the handle on the charging stand. Charging instructions are as follows:| Emerald Flashing | Battery charging;| Emerald green light | battery fully charged; handle removed the charging seat, the restoration of the previous working mode.

2. Working mode selection, by pressing the button for 2 seconds to release to switch the working mode.| Blinking Blue | Progressive mode, working time 10 seconds, light intensity 0-5 seconds from 0-1200mW / cm², 5-10 seconds 1200mW / cm².| Solid blue | Fast mode, working time 3 seconds, light intensity 2300mW / cm ²

3. Turn the light curing lamp on and off, press the button briefly.

4. Switch machine, in standby mode, press the button a short time to open the instrument; stop any operation for 60 seconds, into the ultra-low power standby.