 |
|
Description:
1.AUTOOL CT60 Automotive Injector Tester is used to test automobile injectors to determine whether the fuel injectors are stuck, leaking, or burning.
2.It is possible to set multiple pulse outputs and adjust speed, pulse width, operating time, and other parameters as required. 3.It is also possible to connect two nozzles for simultaneous operation to compare the sprayability status and the spray angle of the fuel injector. |
|
Function:
1.Standard Fuel Injection Nozzle Type: That is, the automobile naturally aspirated fuel injection nozzle, the DC voltage 12V can drive the solenoid valve in the fuel injection nozzle.
2.Types Of High-pressure Fuel Injectors: The turbocharged fuel injectors for automobiles, the instantaneous voltage of 75V can drive the solenoid valve in the fuel injector. 3.Wide Operating Frequency Range: The operating frequency range can reach 600~6000 rpm. 4.Working Time Range: The working time setting range can reach 0~99 minutes. 5.LCD Display: Working frequency and time are digitized for more precise adjustment. |
|
Feature:
1.Easily solve common faults such as stuck, blocked, leaked, or insufficient combustion of the fuel injector.
2.3-Year Warranty and lifetime maintenance. 3.The pulse width and RPM can be continuously adjusted and different programs can be applied to drive the injectors. 4.During the cleaning process, pulse cleaning can be achieved by adjusting the RPM and width to optimize the cleaning effect. 5.Can be used with any fuel pressure tester（For more pressure testers, please search "Fuel Injector Cleaner" in our eBay store）. 6.This device can also be used with ultrasonic cleaners and older fuel injector testers. The drive mode of the GDI engine injector added to this machine can be used as an upgrade kit for the old version of the machine (machine without GDI drive). |
 |
 |
 |
 |
 |
 |
|
Easy To Operate:
Step 1: Connect the pulse signal wires to the fuel injector.
Step 2: Adjust the required working time and operating frequency.Press the“Start”button,
Step 3: Connect the fuel injector and detergent to the fuel injector cleaning connector.
Step 4: Observe the sprayability status and spray angle.
|
|
|
Notice:
1. Make sure the car engine must be turned off before using this device. 2. Don't smoke or ignite near the car. 3. Don't splash the fuel of the car on the hot engine parts. 4. Use this device only in a ventilated place. 5. Don't approach any car's rotating parts, and don't touch any car's heating parts. 6. Don't touch any car parts with dangerous voltage. 7. Wear qualified goggles.
8. After the test is completed, all disconnected car connections should be correctly restored.
|
|
 |
Package Include:
1 PC* AUTOOL CT60 Automotive Injector Tester Main Unit.
1 PC* Power Supply Adapter. 1 PC* User Manual. 1 PC* Injector Connector. 1 PC* Connection Line. 1 PC* Power Supply Cable. |
