4in1 Auto Short Open DC Finder Circuit Tester Car Wire Cable Tracker Repair Tool
 | Description: 1.A multi-function circuit tester suitable for professional and personal use, this circuit breaker finder is designed to identify and trace wires or cables without damaging the insulation. You can also use it to check short circuit and locate open circuit and so on. There are a Sender and a Receiver included in the instrument. 2. YUANRI electrical wire tracer detects and alerts you immediately where a circuit is open. You can quickly and easily Locate short circuits, open connections, broken wires, current leaks and even trace wires. You can also find intermittent circuit problems by flexing wires or connectors and listening for a change in the receiver ton. 3. Allowing you general tracing or pinpointing the problem location.It also shows you the direction to the short with its direction indicator,eliminating the guesswork. This professional tool will work on all kinds of circuits with voltages between 6 and 42 volt DC.such as those found in automobiles, trucks,tractors,boats,RVs,etc...With its wide working voltage range. |
 | Function 1. Tracing of wires is made possible even inside bundles, conduits, behind panels, under carpets, upholstery, etc 2. Easy to use: simply connect the transmitter in series with the circuit or wire under test, (i.e.: in place of a blown fuse, across a connector,in series with an open wire, a light bulb socket, etc.), and scanning the circuit/wire with the tracers flexible probe to find the trouble spot 3. 42 V Ready: for use in the new generation of vehicles with mixed or single 42 Volt systems 4. Operates on DC voltages from 6 to 42 volts 5. Internally protected against power surges and overloads 6. 7" flexible probe allows reaching wires in congested places 7. Transmitter and Receiver LEDs show open or short circuit conditions 8. Adjustable sensitivity for all tracing situations 9. No wire piercing required, non-contact technology! | |
 |  |  |
Adjustable Sensitivity Sensitivity can be adjusted according to the detected environment. | Highly Sensitive Probe The circuit tracer uses advanced sensors for high sensitivity and fast response. | Beep Alarm 1. When a circuit breakpoint is detected, the receiver emits a "beep"sound. 2. The closer the probe is to the breakpoint, the faster the sound is, and the higher the volume. |
 | How to Use the Probe? The probe of the Receiver is built of coiled steel and may be bent as needed, in order to reach wires in ongested or difficult areas. Depending on the circuit characteristic and sensitivity settings, the probe will pick up the signal from the wire in a range of positions. However,for the best possible range the Receiver’s probe tip (black cap) should be positioned perpendicular (at 90°) to the wire being traced and either above or below it. |
 |  |
 |  |  |
External Headset Connection when used in a noisy environment, connecting headphones can detect circuit problems more quickly. Note:The headset is universal, this product does not include headphones. | Specifications:
| Package Included:
|
