 | |
 | Description: AUTOOL SDT205 Car Smoke Leak Detector is a professional tool for automatic pipe leak detection. It will help us to quickly and accurately position leaks from cars and motorcycles on the pipe systems, Fuel pipe, air intake system, exhaust system and cooling tank system. Main Functions: Air Tightness Test: check air tightness of the pipeline and leakage under the system pressure. Air Intake System Test: check tightness of the pipeline and its degree of damage. EVAP System Test: check the fuel evaporation leakage of the EVAP system. |
Features： [Powerful and Easy to Operate ]: The AUTOOL SDT 205 has its own Air Pump without relying on other machines and Pressure Gauge with precise scales. Simply connect the detector with the DC12V battery, it can output thick smoke within 30s after turning on. [Air Mode & Smoke Mode]:Built-in air pump and smoke generator, so it does not rely on additional air machine, perfect for Mobile Automotive Repair! The smoke can be produced within 10 seconds, dramatically reducing diagnostic time. Smoke output value: 6L/min. [EVAP Detection]: American cars that began production in 1996 are equipped with EVAP service ports; in most American cars, the EVAP service port is usually located in the engine compartment, but the EVAP service port of some special models may be located in other locations. Open the plastic cover of the EVAP service port, then use the spool wrench to remove the check valve clockwise, then install the EVAP service port adapter, and introduce smoke from the port into the EVAP leak detection system. [3 Years Warranty]: For damage caused by non-human factors, we promise to resend parts for free within 3 years. For any needs, you are warmly welcomed to contact us and we will get back to you ASAP within 24 hours. | |
 |  |  |
Dual testing model AUTOOL SDT205 EVAP Leak Testers come with a dual testing model including air mode and the smoke mode. Air Mode:Independent controlled built-air pump. Smoke Mode: Independent controlled smoke generator. These enable you detect the leaks precisely. | Built-in air pump saves time and money You’ll have to buy an air compressor in addition to the detector in most cases to be able to test your vehicles for leakages, AUTOOL SDT205 car fuel leak detector already has that feature built-in. So you’re saving some extra money! | Wide range of applications Suitable for all domestic cars, motorcycles, snowmobiles, off-road vehicles, beaches. Cars, light trucks and speedboats, etc. Using together with auto diagnostic tool, you can find the vehicle problem accurately and diagnose fault. |
 | ||
Cautions: 1.When you use this smoek machine for the first time, fill with 10ml oil. Please be careful NOT to beyond this range. 2.Fresh oil can be filled with only when the smoke gets thin, and it can't be filled over 20ml each time. 3.Before filling fresh oil, please pour out the left oil in the detector & replace the detector oil regularly. 4.During the process of leak detection, please keep away from smoke-sensitive parts. | ||
 | |
Do NOT run the detector over 8 minutes continuously. It needs interval rest. The detector has an intelligent protector, if it exceeds the working limit, such as over 75 ℃, it will automatically turn off the power. In this case, please operate it later. The round part of this detector has temperature, please be careful to avoid burns. If the test pipe needs to be disconnected in the middle, please secure the other side with a rubber stopple.
Test Liquid: This product can be used with Baby oil or skin care glycerin or industrial glycerin,the selected smoke oil shall be pure non-aqueous liquid and in a fluid state. Do not use viscous smoke oil which can easily damage the equipment. Use a measuring bottle with pointed tip when adding smoke oil. If it is overfilled, open the oil outlet to drain an appropriate amount of smoke oil.
Attentions: 1.When you use this detector the first time, please fill 20ml oil, not beyond this range. 2.New oil can be filled with only when the smoke is light,and it can't be filled over 15 ml every time. 3.Before filling new oil, please pour out the remaining oil in the detector. 4.Please replace the detector oil regularly.
Tips for maintenance: With longtime high temperature, the smoke and oil will oxidize and deteriorate. It will infect the service life of smoke generated part, so please change smoke and oil regularly. 1.Before filling new oil, please pour out the remaining oil in the detector. 2.When the smoke output has water drops, please replace with new oil. 3. Liquid paraffin and baby oil are OK. 4.Please fill new oil with equipped oil bottle. | |
 | Specifications: Power supply: DC12V±2 Output Pressure: ＜15psi Output smoke value: ＜6L/min Ambient temperature: -10℃~+40℃ Relative humidity: ＜85% Controllable flow value Main unit dimensions:250x160x165mm Package weight:295x295x210mm Air Pressure Outlet: Built-in air pump Two modes: smoke mode and air mode Multiple protections: oil outlet, overheating and overload protection |
 | Package Includes: 1* AUTOOL SDT205 Car Smoke Leak Detector Main Unit 1* Power Cord Clamp 1* Smoke hose 1* Standard Cone adapter 1* Hard rubber kits 1* 30ml Test oil refill bottle 1* Valve Cord wrench 1* Universal airbag adapter 1* EVAP special connector 1* User manual |
