Logiciel De Mise A Jour Du Système Radio Navigation Corvette C6 2007-2009.

Numéro pièce : P/N 20906717

Permet de corriger le défaut d'affichage intermittent ( écran noir)  des écrans gps radio navigation  des corvette  C6 de 2007-2009 tel que décrit dans le rapport technique décrit ci dessous :

09-08-44-019: Intermittent Navigation or Radio Screen Blank After Vehicle Starts, Radio Controls May Not Function (Update Radio Audio Software Using Disc) - (Sep 29, 2009)

Subject: Intermittent Navigation or Radio Screen Blank After Vehicle Starts, Radio Controls May Not Function (Update Radio Audio Software Using Disc)

Models: 2007-2009 Chevrolet Corvette

Equipped With Navigation Radio RPO U3U

Condition

Some customers may comment that when starting the vehicle, the navigation or radio screen stays blank.

The technician may notice that restarting the vehicle may result in the radio operating properly.

Cause

This condition may be caused by a radio software timing anomaly.

Correction

Important: DO NOT replace the navigation radio for this condition.

Note: Wearing latex gloves is recommended while performing the software update in order to avoid fingerprints on the discs and the radio.

Update the radio audio software with the disc using the following procedure:

Technicians are to contact TAC when this condition exists in order to obtain the initial copy of the radio audio software update disc for their dealer.

1.1. TAC will record all of the necessary case information and send an electronic copy to the Warranty Parts Center (WPC) for the disc.

1.2. The WPC will create the radio audio software update disc request. The first copy of the disc is free. Additional copies of the disc must be purchased.

Note: The update CANNOT be performed with the ignition in the accessory mode.

Turn the ignition ON or start the engine.

Note: After the Corvette logo appears on the radio screen, there is a delay before the radio controls will function. This is a normal condition while the radio comes online.

Press the Eject button at the bottom center of the radio bezel to open the front panel.

Press the DVD button next to the bottom slot to eject the navigation radio map disc. Remove and carefully set aside the map disc.

⇒ If the map disc is not loaded in the radio, you will only hear the DVD eject mechanism operate but a disc will not eject. Wait for the mechanism to stop running before proceeding to the next step.

Note: DO NOT TURN OFF POWER TO THE RADIO WHILE THE SOFTWARE IS LOADING.

Insert the radio audio software update disc into the bottom DVD slot.

Note: THE RADIO DISPLAY WILL TURN OFF WHILE THE SOFTWARE IS LOADING.

WAIT four to five minutes for the software update to complete. WHEN the software update is complete, the radio will reboot and the Corvette logo will appear.

Note: The radio audio software update disc CAN BE reused. DO NOT give the disc to the customer.

Press the DVD button next to the bottom slot to eject the disc. Remove and retain the radio audio software update disc.

Insert the customers navigation radio map disc into the bottom slot. Touch the "I agree" screen button.