PACKAGE CONTENT:( NOT include Raspberry Pi Pico.)
Pico-ePaper-5.65 x1 Dies ist kein Touchscreen.
Standoff pack x1
Low Power Consumption, Wide Viewing Angle, Paper-Like Displaying Without Electricity
Ideal for price tags, shelf labels, industrial instruments...
Size5.65"
Resolution600×448
Viewing Angle>170°
Display Color7-Color
Grey Scale2
CommunicationSPI
Display PanelE-paper
ExperiencePaper-like
EnvironmentAmbient Light Required
Display TypePassively Reflective
Power ConsumptionUltra Low
Display DurationPersists without Power
Advanced Color ePaper (ACeP) technology, supports 7-Color display
No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
SPI interface, requires minimal IO pins
Onboard voltage translator, compatible with 3.3V / 5V MCUs
Wiki English manual (Raspberry Pi Pico C/C++ and MicroPython examples)
Wiki English manual: www.waveshare.com/wiki/Pico-ePaper-5.65
OPERATING VOLTAGE | 3.3V/5V | DISPLAY COLOR | ACeP 7-Color |
RESOLUTION | 600×448 pixels | GREY SCALE | 2 |
INTERFACE | 3-wire SPI, 4-wire SPI | VIEWING ANGLE | >170° |
PARTIAL REFRESH TIME | N/A | FULL REFRESH TIME | <35s |
OUTLINE DIMENSIONS | 128 × 101.5mm | DISPLAY SIZE | 114.9 × 85.8mm |
REFRESH POWER | 50mW (typ.) | STANDBY CURRENT | <0.01uA (almost none) |
DOT PITCH | 0.1915 × 0.1915mm |
E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper.
E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180° viewing angle. It is usually used as e-reader due to its paper-like effect.
Onboard Female Pin Header For Direct Attaching To Raspberry Pi Pico
For Use With Other Controller Boards Like Raspberry Pi/Jetson Nano/Arduino/STM32
VCC | 3.3V/5V |
GND | Ground |
DIN | SPI MOSI pin |
SCK | SPI SCK pin |
CS | SPI chip selection, low active |
DC | Data / Command selection (high for data, low for command) |
RST | External reset, low active |
BUSY | Busy status output |
Compatible With 3.3V / 5V MCUs
Suitable For Price Tags, Asset/Equipment Tags, Shelf Labels, Conference Name Tags...