Kyosho Inferno  gt2,gt2 ve,gt1,mp7.5,neo,ve race spec,neo2,neo3,st

  This kit is ideal for high speed set up !
  Convert you nitro inferno to brushless or upgrade your electric inferno ve.
  3 Different motor mounts to match any type motor you want to use.
  Designed to accept very small (11t) pinion gears to huge  34t or larger pinion gears with the stock   46t spur gear.
  Convert your inferno to a dragster car  improoving the durability with the7075 alloy machined motor mount.
  To prevent overheating issues using very large pinion gears above 26t we suggest to use hi torque motors with low kv rating (1400-1800 kv)!!!


  For gt2/St :Battery /esc tray  accept large capacity batteries up to 15,5cm long and 1/5 hv esc like castle creations xl2 or turnigy 1/5 200 amp .

  For inferno gt and all buggies :Battery /esc tray accept large capacity batteries up to 15,5cm long and 1/8 size esc's



Available in 3 types depending the motor size (select the apropriate motor mount type to add it to your basket)

                          1/8 type: up to 40-42mm can diameter motors like castle-neu 1512-1515-1518-1521-1527  leopard 40 or 42 series,tekin t8,tenshock 812 or similar 1/8 size motors.

                            1717 type: up to 50mm can diameter motors like castle 1717 (xo-1) or poseidon 1717 or similar                                       motor  with 25mm spaced m4 mounting holes.

                            1/5 type: up to 60mm can diameter motors like castle 2028 or similar 1/5 motors with                                                      30mm apart m4 holes (pinion up to 45t or or even 50t depending the spur gear size you will use)


                    Battery/esc tray  in 2 types (select the apropriate kit to add it to your basket)

  •             Gt2/St  Long version
  •             Gt/Buggies Short Version
                (No hardware including, like screws or battery straps)

       

                    Compatibility :All motor mounts compatible with all Inferno's  gt2,gt2 ve,gt1,mp7.5,neo,ve race

                     spec,neo2,neo3,st.

 

  For gt2 ve and neo ve  cars you may need to replace the plastic center diff top plate with the if226 aluminum top plate

  If your inferno car has the IF09 center diff mount (the only inferno cars that use these mounts are gt and gt2 nitro versions) replace it with the IF131 diff mount or just add 2 0,5mm washers between the top diff plate and the motor mount
 

  Special orders for mp9 cars are also available, order per request only!