7016A
Features
1. High accuracy and wide measuring range.
2. Stable performance and support for long time use.
3. Large, clear display for improved readability.
4. Easy to configure. Supports °F and °C display.
5. It can control heating and cooling output.
1. High accuracy and wide measuring range.
2. Stable performance and support for long time use.
3. Large, clear display for improved readability.
4. Easy to configure. Supports °F and °C display.
5. It can control heating and cooling output.
Specification
Model: 7016A
Material: ABS
Voltage: 12v, 24v, 220v (optional)
Measuring range: -50℃～110℃
Accuracy: 1°C
Measurement accuracy: ±0.5°C
Sensor: NTC (10K3435) 1m
Operating temperature: 0℃～50℃
Storage temperature: -10℃～60℃
Model: 7016A
Material: ABS
Voltage: 12v, 24v, 220v (optional)
Measuring range: -50℃～110℃
Accuracy: 1°C
Measurement accuracy: ±0.5°C
Sensor: NTC (10K3435) 1m
Operating temperature: 0℃～50℃
Storage temperature: -10℃～60℃
Product Description.
7016A is a universal single-phase temperature controller, relay output 30A, high power, can control heating/cooling, control temperature in -50 ~ 110 ℃, -58 ~ 230 'under can be set arbitrarily, the temperature difference between on and off can be set arbitrarily between 1 ~ 25 degrees 0.1 degree display resolution, 1 degree control resolution, delay start function, 0-30 minutes adjustable, temperature adjustment Upper and lower limit range limit function with data saving function.
7016A is a universal single-phase temperature controller, relay output 30A, high power, can control heating/cooling, control temperature in -50 ~ 110 ℃, -58 ~ 230 'under can be set arbitrarily, the temperature difference between on and off can be set arbitrarily between 1 ~ 25 degrees 0.1 degree display resolution, 1 degree control resolution, delay start function, 0-30 minutes adjustable, temperature adjustment Upper and lower limit range limit function with data saving function.
Function description.
Press the RST key to turn on the thermostat, in the running state, press the key for more than 3 seconds to turn off the thermostat.
Press the RST key to turn on the thermostat, in the running state, press the key for more than 3 seconds to turn off the thermostat.
Cooling mode: When the measured temperature is higher than or equal to the set value + return difference, the relay will be activated and the output will be started; when the measured temperature is lower than the set value, the relay will be opened and the output will be closed.
Heating mode: When the measured temperature is higher than or equal to the set value, the relay opens and closes the output; when the measured temperature is lower than the set value - return difference, the relay opens and activates the output.
Differential return function: The differential return setting defines the maximum interval between start and stop, which is 1°C minimum and 15°C maximum for this machine.
Temperature correction function: When the measured temperature deviates from the standard temperature, the temperature correction function is used to bring the measured value of the machine into line with the standard temperature, the corrected temperature = the pre-corrected temperature + the corrected value (the corrected value can be positive, negative or 0 )
Time delay protection function: In the cooling mode, the first power on, when the measured value is higher than the set value + back to the value of the difference, the machine will not immediately start cooling, it needs to run the set delay time before the machine can start cooling, two adjacent cooling start interval is greater than the delay time, the machine immediately start cooling, two adjacent cooling start interval is less than the delay time, the machine needs to run the remaining delay time to start cooling. The delay time starts from the moment of stopping, the delay time of the heating mode is the same as the cooling mode.
Note: It is recommended that only equipment with compressor cooling use the delayed start function, users who do not need the delayed start function should set this parameter to 0.
Note: It is recommended that only equipment with compressor cooling use the delayed start function, users who do not need the delayed start function should set this parameter to 0.
Upper and lower limit function: The setting of HS and LS limits the setting range of the control temperature point, for example: HS is set to +15, LS is set to -10, the control temperature can only be adjusted between -10 and +15, when the control temperature is set to -10 and then press the key, the display value will remain at -10 and will not fall; when the control temperature is set to +15 and then press the ▲ key, the display value will remain at +15 and will not rise. If the set point needs to be outside this range, the values of HS and LS must be changed first to achieve this.
Heating mode.
For example, if you want to heat a device to 25 degrees and stop, then start heating again when the temperature drops to 20 degrees, how do you set it?
Setting method:
Set the mode to H
Set the temperature to 25°C, set the return difference to 5, then when the temperature is higher than or equal to 25°C the relay will open and turn off the output, when the temperature is lower than 20°C the relay will turn on again and start the output.
For example, if you want to heat a device to 25 degrees and stop, then start heating again when the temperature drops to 20 degrees, how do you set it?
Setting method:
Set the mode to H
Set the temperature to 25°C, set the return difference to 5, then when the temperature is higher than or equal to 25°C the relay will open and turn off the output, when the temperature is lower than 20°C the relay will turn on again and start the output.
Cooling mode.
For example, if you want to control a device to stop at 23 degrees and start cooling again at 27 degrees, how do you set it?
Setting method
Set the mode to C
Set the temperature to 27 degrees, set the return difference to 4, then when the measured temperature is below 23 degrees the relay opens and turns off the output, when the temperature is higher than or equal to 27 degrees the relay turns on again and starts the output
For example, if you want to control a device to stop at 23 degrees and start cooling again at 27 degrees, how do you set it?
Setting method
Set the mode to C
Set the temperature to 27 degrees, set the return difference to 4, then when the measured temperature is below 23 degrees the relay opens and turns off the output, when the temperature is higher than or equal to 27 degrees the relay turns on again and starts the output
List
1 x digital thermostat
1 x Sensor
1 x digital thermostat
1 x Sensor
7016K
Specification
Name:Digital thermostat
Model:ZFX-7016K
Control range:1-999 ℃
Measurement error:1 ℃
Sensor:K-type thermocouple
Control accuracy 1 ℃
Operating voltage:12V/24V/110-220V
Relay output:10A/30A
Data storage:Yes
Working temperature:1-80℃
Opening size:70*28mm
Sensor:1m
Specification
Name:Digital thermostat
Model:ZFX-7016K
Control range:1-999 ℃
Measurement error:1 ℃
Sensor:K-type thermocouple
Control accuracy 1 ℃
Operating voltage:12V/24V/110-220V
Relay output:10A/30A
Data storage:Yes
Working temperature:1-80℃
Opening size:70*28mm
Sensor:1m
List
1 x Digital Thermostat
1 x K-sensor
1 x Digital Thermostat
1 x K-sensor
WH7016C
Specification
Model: WH7016C
Temperature measurement range: -50°C ~ 110°C
Control temperature range: -50 to 110°C
Temperature measurement difference: ±0.5°C
Resolution: 0.1°C
Accuracy: ±1°C (-50 - 70°C)
Sensor type: NTC (10K / 3435)
Power supply: DC 24V / DC12V / AC 220V 110V
Power consumption: <2W
Relay contact current: rated 5A
Data retention: Yes
Operating temperature: 0 - 50°C
Storage temperature: -10 - 60°C
Dimensions: 78 x 71 x 29mm (L * W * H), probe cable length: 1m; probe size: φ4mm* 20mm
Colour: displayed as picture
Display font: red
PLS note that due to lighting effects, monitor brightness/contrast settings, etc., there may be some slight differences in the hue of the picture and the actual item!
Specification
Model: WH7016C
Temperature measurement range: -50°C ~ 110°C
Control temperature range: -50 to 110°C
Temperature measurement difference: ±0.5°C
Resolution: 0.1°C
Accuracy: ±1°C (-50 - 70°C)
Sensor type: NTC (10K / 3435)
Power supply: DC 24V / DC12V / AC 220V 110V
Power consumption: <2W
Relay contact current: rated 5A
Data retention: Yes
Operating temperature: 0 - 50°C
Storage temperature: -10 - 60°C
Dimensions: 78 x 71 x 29mm (L * W * H), probe cable length: 1m; probe size: φ4mm* 20mm
Colour: displayed as picture
Display font: red
PLS note that due to lighting effects, monitor brightness/contrast settings, etc., there may be some slight differences in the hue of the picture and the actual item!
List
1 x Digital Thermostat
1 x NTC sensor
1 x Digital Thermostat
1 x NTC sensor
1.We accept PayPal payment ONLY, and must be received within 5 days from the date of purchase.
2. It is easy and safe for you to pay by credit cards, debit cards, bank transfers and PayPal account balances.
3.Buyers are responsible for import duties,custom fees and taxes, if any, please check your country.
1.We only ship to the confirmed address provided by eBay. please make sure your ebay address is 100% matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.
2.Orders will be processed instantly and dispatched within 1-2 business days except hoilday, so we do NOT accept any email/message note after you place orders.
3.All package need to wait 30 days,Please take care it.Less than 30 days,we can't take a refund.
1.We believe our items are so outstanding. We are convinced you will be happy with your Purchase.
2. If you do not satisfy with our items. Please simply return to us within 30 Days in original condition. Just pay for the returned postage. Then we can issue full refund or resend the item to you after the returned item arrived at our warehouse.
3. Please include your eBay ID and item number with any email requests.
2. If you do not satisfy with our items. Please simply return to us within 30 Days in original condition. Just pay for the returned postage. Then we can issue full refund or resend the item to you after the returned item arrived at our warehouse.
3. Please include your eBay ID and item number with any email requests.
1.We greatly appreciate your POSITIVE feedback. Please do NOT leave negative feedback without asking for help.
2.Please DON'T leave negative or neutral feedback if you haven't received item in 30 days, because we have mentioned the shipping time repeatedly.
2.Please DON'T leave negative or neutral feedback if you haven't received item in 30 days, because we have mentioned the shipping time repeatedly.
1. If you have any questions, please feel free to email our service specialists.
2.Just contact us using the " Ask the seller a question" link on eBay.
3.Our aim is to provide Top Level Customer Service, normally so we will try our best to solve any problem.
2.Just contact us using the " Ask the seller a question" link on eBay.
3.Our aim is to provide Top Level Customer Service, normally so we will try our best to solve any problem.
Am 15.12.21 hat der Verkäufer die folgenden Angaben hinzugefügt: