Antiquing Fluid is a cold patination liquid treatment which will colour new or bright brass, copper or bronze to give an antique look. It is ideal for use in antique restoration and must be used on clean unlacqueredbrass and copper free from oils and grease. The level of colouration is controlled by the dilution.

• Black: For all copper based alloys & mild steel.
  The process is primarily designed for immersion. The surface of the metal is not etched, there are no dimensional changes. Parts are usually oiled or waxed after treatment as the blacking process itself is not formulated to impart any corrosion preventive properties. The process can be glycol thickened and brush applied for touching up work.
  This product will also impart a dark grey finish to zinc.
  
• Brown: For Copper & Brass, on Gilding Metal and Silver.
  The colours range from light to dark brown, but a slight etching effect gives a flatter thereby darker effect. The process can also be used as a barrelling process as described above and can be used as a subsequent process on electroplated deposits of Copper, Brass and Silver.
  
• Bronze: For Copper & Brass, on Gilding Metal and Silver. This is very similar to the brown, however gives a more warmer tone and a bit lighter shade of ageing.
  
• Old English Brass: For Copper & Brass, on Gilding Metal and Silver. This is very similar to the bronze but with a lighter tone, more of a washed out appearance.

The Brown, Bronze and Old English Brass are NOT suitable for Steel.

Disposing of antiquing fluid

For small quantities (less than 1L), antiquing fluid should be mixed with caustic soda, bicarb of soda or something with a similiarly high alkaline level.

The idea is to neutralize the acidic antiquing fluid, however the exact amount of alkaline substance can vary, so it's best to start with 1 tablespoon and increase until the desired level is reached (the solution should go cloudy).

Once mixed, the solid content should be sieved out and disposed of with your general waste. The left over fluid can be heavily diluted with water and poured down the drain.

For quantities larger than 1L, please contact your local chemical disposal company who will be able to assit.

Please note that the photo examples used are as a guide only. You can achieve many different effects using this product depending on the method of application.

Please note that 250ml, 500ml and 1L bottles will come with our own label, but the fluid inside is from Curator.

Delivery Information

Returns / Refund Policy

All items may be returned within 14 days of receipt. Please note that returns can only be accepted if the item is unused and unopened. Buyer pays return postage.

About AG Woodcare Products Ltd

AG Woodcare products Ltd is a family run business, formed in 1996 and became a limited company in 2003.

Since 1996, AG Woodcare products Ltd has introduced many new innovative products to the UK wood working industries, contributing to our continuous growth. Only a good sound knowledge and understanding of the woodworking industry for over twenty years enable us to do this, in-fact many larger companies have since introduced similar products.

At AG Woodcare products Ltd, we are committed to supplying the highest quality, reliable and cost effective choice of products available from one single supplier. All products and equipment conform where required to all British and European safety legislation. As a distributor for the leading brands, we are able to buy more competitively and, therefore, offer you the very best prices around.

We have a shop in Bidford-upon-Avon, Warwickshire where we have an expert or 2 on hand to offer advice on any of our products. Please visit us if you are in the local area.

Our opening hours are:
Mon-Fri: 8:30am – 5:00pm
Sat: 8:30am – 12:30pm
Sun: Closed