Parameters:
1>.Product Name:Digital Temperature Controller
2>.Product Number:XY-WT01
3>.Working Voltage:DC 6V-30V
4>.Control Load Current:10A(Max)
5>.LCD refresh rate:0.5 second
6>.Temperature Sensor:NTC-10K B3950
7>.Test temperature: -50~110℃
8>.Control precision:0.1℃
9>.Sensor length: 0.5 meter
10>.Sensor probe specifications:4*30mm Stainless steel
11>.Physical dimension:79*44*26mm
12>.Operating Humidity:5%~95%RH

Product functions

1. Heating mode 'H'.  

When the detection temperature ≤ the set temperature - return difference temperature, the relay is on, and the heating equipment starts to work.

When the detection temperature ≥ setting temperature, the relay is disconnected and the heating equipment stops working.

2. cooling mode 'C'.

When the detection temperature ≥ the set temperature + return temperature, the relay is on, and the cooling equipment starts to work.

When the detection temperature ≤ the set temperature, the relay is disconnected and the refrigeration equipment stops working.

3. High temperature alarm function ALA.

When the actual temperature ≥ alarm temperature, the system turns on the sound and light alarm, and disconnects the relay, any key to stop the sound and light.

4. delayed start OPH.

When the completion of a normal heating or cooling work, the system starts timing T, only when T ≥ OPH, the system can carry out the next round of heating or cooling work.

5. Temperature correction function OFE(-10.0~10.0℃).

system working for a long time, deviations may occur, corrected by this function, the actual temperature = measured temperature + calibration value.

6. Parameter remote reading/setting.

Parameters such as start temperature, stop temperature and temperature correction can be set through UART.  

7. Real-time temperature reporting.

If the temperature reporting function is enabled, the product transmits the detected temperature to the terminal via UART at 1s interval, which facilitates data collection.

8. Relay enable (default on).

If relay enable is turned off, the relay remains disconnected.

9. Restore factory settings.

Press the STOP, SET keys simultaneously for more than 3S to restore the factory settings.Product functions.

1. Heating mode 'H'.  

When the detection temperature ≤ the set temperature - return difference temperature, the relay is on, and the heating equipment starts to work.

When the detection temperature ≥ setting temperature, the relay is disconnected and the heating equipment stops working.

2. cooling mode 'C'.

When the detection temperature ≥ the set temperature + return temperature, the relay is on, and the cooling equipment starts to work.

When the detection temperature ≤ the set temperature, the relay is disconnected and the refrigeration equipment stops working.

3. High temperature alarm function ALA.

When the actual temperature ≥ alarm temperature, the system turns on the sound and light alarm, and disconnects the relay, any key to stop the sound and light.

4. delayed start OPH.

When the completion of a normal heating or cooling work, the system starts timing T, only when T ≥ OPH, the system can carry out the next round of heating or cooling work.

5. Temperature correction function OFE(-10.0~10.0℃).

system working for a long time, deviations may occur, corrected by this function, the actual temperature = measured temperature + calibration value.

6. Parameter remote reading/setting.

Parameters such as start temperature, stop temperature and temperature correction can be set through UART.  

7. Real-time temperature reporting.

If the temperature reporting function is enabled, the product transmits the detected temperature to the terminal via UART at 1s interval, which facilitates data collection.

8. Relay enable (default on).

If relay enable is turned off, the relay remains disconnected.

9. Restore factory settings.

Press the STOP, SET keys simultaneously for more than 3S to restore the factory settings.

Product functions.

1. Heating mode 'H'.  

When the detection temperature ≤ the set temperature - return difference temperature, the relay is on, and the heating equipment starts to work.

When the detection temperature ≥ setting temperature, the relay is disconnected and the heating equipment stops working.

2. cooling mode 'C'.

When the detection temperature ≥ the set temperature + return temperature, the relay is on, and the cooling equipment starts to work.

When the detection temperature ≤ the set temperature, the relay is disconnected and the refrigeration equipment stops working.

3. High temperature alarm function ALA.

When the actual temperature ≥ alarm temperature, the system turns on the sound and light alarm, and disconnects the relay, any key to stop the sound and light.

4. delayed start OPH.

When the completion of a normal heating or cooling work, the system starts timing T, only when T ≥ OPH, the system can carry out the next round of heating or cooling work.

5. Temperature correction function OFE(-10.0~10.0℃).

system working for a long time, deviations may occur, corrected by this function, the actual temperature = measured temperature + calibration value.

6. Parameter remote reading/setting.

Parameters such as start temperature, stop temperature and temperature correction can be set through UART.  

7. Real-time temperature reporting.

If the temperature reporting function is enabled, the product transmits the detected temperature to the terminal via UART at 1s interval, which facilitates data collection.

8. Relay enable (default on).

If relay enable is turned off, the relay remains disconnected.

9. Restore factory settings.

Press the STOP, SET keys simultaneously for more than 3S to restore the factory settings.