Mikuni Oz Product Description
Please note: This
kit comes pre jetted.
MUST READ DESCRIPTION FOR MODEL COMPATIBILITY, Available
with or without OEM air-box adapter. All kits are listed seperately, all descriptions are the same for all the kits.
Please note: Select your carb kit to match your
air-filter inlet side diameter as listed below or without a sleeve where the
carb measures 50mm diameter for using with a POD filter (no adapter sleeve
supplied or fitted if taking the 50mm option).
The kit options to fit standard OEM air-box:
This kit fits easily to the 1996 and later models with
the box section frame where it sometimes fouls between the tank and frame on
the earlier models with the round tubular frame. Fitting to the earlier models
may result in a fractional carb offset to one side along with the requirement
to heat and slightly depress the Poly tank for clearance (see our Honda XR650R
TM42-6 Pumper carb kit product description for an extreme example of how to do
this). The performance improvement far out ways any inconvenience experienced
during fitment.
47mm air box intake: Earlier plastic gas tank model Honda XR250’s using the mechanically
operated slide type carb which measures 40mm OD at motor- 103 long – 47mm inlet
at air-filter end. This Carb comes with a 49mm sleeve (for minimal airflow
interruption) fitted where with a little heat your air-box boot is a snug fit.
55mm air box intake: Later model Honda XR250L with the Steel gas tank, also XR250R electric
start and Baja with TPS disconnected, or
other models fitted with a CV carb (vacuum operated slide) which measures 40mm
OD at motor- 103 long- 55mm inlet at air-filter end. This Carb comes with a
54mm sleeve fitted where your air-box inlet will easily clamp down 1mm onto it.
Going fast has never been so easy. These carburetors have for a long time now
been the popular carb of choice to fit to any 250cc or 300cc engine with
allowable space, where chasing optimum increases in performance and power along
with general smooth throttle response and ride-ability. With the nothing short
of outstanding results when fitted to the Honda XR250, this is a simple ready
to bolt on kit.
The kit also comes with throttle cables and a 1/4 turn
quick action throttle as the Honda cables have a non-matching inner wire
length. There are jets provided that may require fitting if your engine does
run a little rich but usually its just bolt on and go. Climate, altitude and
fuel density from different octane fuels all have varying effects on final fine
tuning as does cam, exhaust and cylinder head porting etc. For this reason we
strongly suggest checking the tune as per the supplied instructions to maybe
even get more performance than initially experienced.
This kit includes an silver anodized air-box adapter
(optional) fitted to the carb, a pair of cables and quick action throttle, a
pilot and main jet for tuning.
Additional Information:
Please Note: Other than exact replacement OEM
carburetors, all Mikuni Aftermarket Carburetors and Tuning Components are sold
“As Is” for Off Road / Racing Use Only and are not intended or approved for use
on vehicles operated on Public Roads or in locations where applicable engine
tampering and anti-pollution laws apply.
Australian Shipping Information:
All shipping within Australia is via Australia Post
only.
Please note that we are located at Townsville North
QLD and that all standard shipping “Free Freight” travels by train from us all
the way down the East Coast as far as Victoria. eBay freight times are
estimates only and do not take in to account our location. We have express
options available for all our products also. The freight times around Australia
are as follows-
Standard or eBay “Free Freight”
Townsville to Brisbane 3 days, Townsville to
North/Just South and West is usually 1-2 days,
NSW ACT & VIC 4-6 days, TAS & SA 4-8 days, WA
& NT 8-12 days.
Express Freight
Anywhere in QLD except some rural areas is next day
delivery. NSW ACT & VIC 2 days, TAS & SA 2-3 days, WA & NT 3-4
days.
Please note that weather events such as flooding,
cyclones and other natural disasters etc will delay any ground freight. This is
entirely out of our control if this occurs.
International Shipping Information:
All international shipping is done through Australia Post
Express Courier EMS service.
The international service we use is generally 4-5 Business
days for delivery but can be shorter or longer.
All international buyers are responsible for the
payment of their domestic customs duties and taxes charged on imported goods.
The duty-free threshold and duty/taxes payable rates differ from one country to
another and we strongly advise you check your liability before ordering if
unsure. Please check your tracking on all international shipments within 7 days
to follow their progress and determine if it is being held by your local
customs dept. or on their behalf by the Postal Service, who you will need to
contact using the provided tracking number.
As per the eBay terms and conditions, WE ARE NOT RESPONSIBLE AS A SELLER FOR YOUR
COUNTRIES IMPORT DUTIES OR TAXES, WE HAVE NOT NOR WILL WE EVER PAY YOUR IMPORT
DUTIES OR TAXES, OR REFUND ANYONE FOR THEM AND THEY ARE DEFINITELY NOT INCLUDED
IN THE ITEM PRICE! PLEASE CHECK YOUR COSTS BEFORE MAKING THE PURCHASE! THIS IS
JUST PLAIN OLD COMMON SENSE.
Please also note that international
parcels HAVE to be signed for and all parcels whether domestic or international
are fully insured.
Returns and Refunds:
Our business Warranty or Return period
is 7 days only. We do accept eBay’s 30 day return policy but please read all
the information below carefully before making your purchase.
THE FOLLOWING INFORMATION IS FINAL.
Here at Mikuni OZ we do offer refunds and returns but
there are strict procedures for this.
All carburettor kits that need to be returned for
refund or exchange MUST be returned in the exact same way they left the
warehouse. All Carburetors & Carby kits that have been opened WILL BE
thoroughly stripped and inspected, in the case of any fuel being added, greases
or lubricants, tampering or any form of damage to the carburettor there will be
ABSOLUTELY NO refund and the kit will be returned to you at your expense! THIS
IS FINAL AND NO OTHER EXCEPTIONS!
Absolutely all returns for any reason will be charged
a 10% restocking fee whether it has been opened or not before it was returned
and the freight for us to send you the kit originally will be deducted also
before your refund is issued.