1. Supported IC models: WS2811, WS2812B, WS2801, WS2813, SM16703, TM1804, UCS1903, SK6812, LPD8806, APA102, APA105, DMX512, TM1914, TM1913, P9813, INK1003, P943S, P9411, TX6813, TX182, TX6813 , GS8208, SK9822, TM1814, SK6812-RGBW, P9414, P9412. (Note: There are no WS2812 and WS2813 options in the IC model in the APP. When using these two types of light strips, the model can be selected as WS2811.)
2. Mobile phone Bluetooth APP control, remote control distance is long, and the operation is user-friendly;
3. The sequence of RGB channels can be adjusted, and it supports common single-wire or dual-wire LED driver ICs on the market (support ICs are optional in the App);
4. It can support up to 960 pixels and support simple point layout operations;
5. Built-in 40 kinds of music effects (including 18 kinds of light bar music effects, 30 kinds of light show music effects) and 180 kinds of regular non-music dynamic pattern effects;
6, DC5-12V wide voltage input, the power supply has anti-reverse connection function;
7. It has the function of saving settings after power failure.
Basic parameters:
1. Model: SP107E Symphony Bluetooth Music Controller
2.APP software: LED Chord
3. Input voltage: DC5-24V
4. Working current: 20mA~40mA
5. Product size: 85*45*22mm
6. Connection method: DC interface is connected to power supply, 4pin terminal interface is connected to light strip
7. Control distance: about 20 meters
8. Can control 960 pixels
Mobile APP specific operation instructions:
APP software download:
The controller is controlled by the mobile APP and supports IOS and Android systems.
iPhone requires IOS10.0 or higher;
Android phone requires Android 4.4 or higher;
You can search for "LED Chord" in the app store, or scan the corresponding QR code to download.
1. Download the APP software and turn on the Bluetooth of your mobile phone before using it.
2. Open the APP, wait for the mobile phone to connect to the Bluetooth controller device, and refresh the APP interface until the device named "SP107E" appears, click to connect.
2 operation interfaces: Effects (dimming mode) and Music (music mode).
Controller music mode switch:
SP107E audio input supports microphone and audio line input in two ways:
1. If you need to input audio through the audio cable, insert the male head of the one-to-two audio cable into the AUX IN port of the controller, and the other male head to the audio output device (such as MP3, mobile phone, tablet, etc.), and the female head can be connected When the speaker is used to play music, the controller will automatically switch to the audio line signal input mode;
2. If the microphone input audio is required, the controller does not need to connect the audio cable, and the controller will automatically switch to the microphone signal input mode.
Shipping list:
Controller X1
Audio cable X1
DC cable X1
Terminal line X1