PSL-311 Instructions for the Use of Multifunctional Counters

S•

S3

S2

A

83528

123456

S1 Button: Count/Statistics Time Hiding (View)

S2 Button: Channel Switch/Reminder Settings (View)

S3 Button: LED/Zero/Time Settings

Count: Short press the front S1 big button, every time + 1.

Zero clearing: Press the S3 button on the upper left for 3 seconds to clear the current

channel data and time.

LED lights: Press the S3 button on the upper left and light the LED backlight for 5 seconds.

Unlock/lock:At the same time, press the left S2 button and S3 button to unlock/lock.

View time:Short press S3 button on the upper left to light the LED lamp, and then press

short again to cycle between the time and the current channel.

the clock, short press + 1, long press S3 button again for a minute, short

press + 1, long press S3 button again or short press S1/S2 button to confirm

and exit the time setting.

Set a reminder value:Switch to the channel where you want to set the reminder value.

Press the S2 button on the lower left side for a long time to display

the OFF 000 (flicker), press the big button S1 to the value you need

to set, then press the S2 for a long time to confirm and exit directly.

Or press the S1 big button for a long time to set the current value as

the reminder value.Shortly press S2 to switch to the next channel

reminder value setting. When the reminder value no longer flickers,

press the big button S1 to exit the setting mode immediately.

View reminder values*: The current channel reminder value can be viewed by pressing

the S2 button on the lower left side for a long time, and then the

next channel reminder value can be queried by pressing the S2

button in short order.

Turn off reminder values:Long press the S2 button on the lower left, and then short press

the S3 button on the upper to change the current reminder status

(ON on/OFF off).

Modify the reminder value:Press the S2 button on the lower left side for a long time, then

press the S3 button on the upper part to clear the current

reminder value, and then press the setting step to reset it

Total time used: The time in the upper right corner of the display is the total time used for

the current channel count (default on), and the display can be hidden

viewed by pressing the S1 big button for 3 seconds.

Low power indicates: When the power is too low, the screen flickers to show "Lo". In

order to maintain the data, all functions are disabled at this time,

new batteries must be replaced before they can continue to use.

Welcome to use our APP** to store the data. Chinese Only

Replacement of batteries: This product is designed for replaceable batteries. The battery

model is CR1632. When the battery is pulled out, the screen

will automatically shut down. The internal large capacity

capacitor can keep the data for one minute. Therefore, it is

necessary to replace the battery in one minute. If the battery

model exceeds one minute. the data of the counter will be lost.

Batteries can be divided into positive and negative electrodes.

When replacing batteries, it should be noted that the positive

electrodes of batteries printed with the words "CR1632", "+"

are the positive electrodes of batteries. The batteries are loaded

into the battery bracket, the positive electrodes are facing the

bottom of the counter, and then inserted into the counter to

complete the battery replacement.

Explain:

* Reminder value: That is the set number, when the count reaches the multiple, it will be

reminded, "Buzz". Channel 1-6 can be set arbitrarily.

*APP: You can scan the QR code to get. The APP is Chinese Version Only. All other APP

for prayer are welcome to cooperate with us.

" A "The channel reminder value is fixed - 100 and cannot be changed

"08"The channel remind value is fixed - 108 and cannot be changed.