PACKAGE CONTENT: ( NOT include Raspberry Pi board.)
SIM7070G Cat-M/NB-IoT/GPRS HAT x1
LTE Antenna x1
GPS External Antenna (B) x1
USB Cable x1
Screw Pack x1
Low Power Narrow Band Cellular IoT Communication Module For Raspberry Pi
Based on SIM7070G, Global Band Support
This is a telecommunication HAT for Raspberry Pi which supports global bands of NB-IoT, Cat-M, and GPRS, as well as GNSS positioning function. Due to its advantages like small size, low delay, and wide coverage, it is the ideal choice for IoT applications such as intelligent instruments, asset tracking, remote monitoring, e-health, and so on.
Compared to SIM7080G, this module also supports GPRS (2G); compared to SIM7000C/E, it is more generic due to the global bands support.
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
Supports communication protocols such as TCP/UDP/HTTP/HTTPS/TLS/DTLS/PING/LWM2M/COAP/MQTT
Supports GNSS positioning (GPS, BeiDou, GLONASS, Galileo)
Onboard USB interface, to test AT Commands, get GPS positioning data, and so on
Breakout UART control pins, to connect with host boards like Arduino/STM32
SIM card slot, supports ONLY 1.8V SIM card (3V SIM card is not available)
2x LED indicators, easy to monitor the working status
Baudrate: 300~3686400 bps
Common baudrate auto-negotiation: 9600/19200/38400/57600/115200 bps
NB-IOT/CAT-M/2G | |
Band | NB-IoT: B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B25/B26/B28/B66/B71/B85 |
Cat-M: B1/B2/B3/B4/B5/B8/B12/B13/B14/B18/B19/B20/B25/B26/B27/B28/B66/B85 | |
GSM/GPRS/EDGE: 850/900/1800/1900MHz | |
Data rate | NB-IoT: 136Kbps(DL)/150Kbps(UL) |
Cat-M: 589Kbps(DL)/1119Kbps(UL) | |
GPRS: 85.6Kbps(DL)/85.6Kbps(UL) | |
EDGE: 236.8Kbps(DL)/236.8Kbps(UL) | |
SIM card support | NB-IoT/Cat-M/2G card (1.8V SIM card ONLY) |
Applicable region | global |
GNSS | |
Receiver type | 16-channel |
C/A Code | |
Band | GPS L1: 1575.42 ± 1.023MHz |
GLONASS L1: 1598.0625 ~ 1605.375MHz | |
BDS B1: 1559.052 ~ 1591.788MHz | |
Galileo L1: 1575.42 ± 1.023MHz | |
Data format | NMEA-0183 |
Antenna | Active antenna |
OTHER | |
Power supply | 5V |
Operating voltage | 5V / 3.3V (configured via 0Ω resistor) |
Current consumption | about 41mA (idle mode) |
Operating temperature | -40°C ~ 85°C |
Storage temperature | -45°C ~ 90°C |
Dimensions | 30.50mm × 65.00mm |
Compatible With Raspberry Pi Series Boards
NB-IoT:B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B25/B26/B28/B66/B71/B85
Cat-M:B1/B2/B3/B4/B5/B8/B12/B13/B14/B18/B19/B20/B25/B26/B27/B28/B66/B85
GSM/GPRS/EDGE:850/900/1800/1900MHz
Supports Communication Protocols Including TCP/UDP/HTTP/HTTPS/TLS/DTLS/PING/LWM2M/COAP/MQTT
Supports GPS, BeiDou, GLONASS, Galileo Positioning
SIM7070G
MP1482 power chip
RT9193-33 power chip
Raspberry Pi GPIO header
for connecting with Raspberry PiUSB interface
for testing AT Commands, getting GPS positioning data, etc.SIM7070G control interface
for connecting with host boards like Arduino/STM32SIM card slot
supports 1.8V SIM card ONLYGNSS antenna connector
LTE antenna connector
Module power key
Network status indicator
Power indicator
Operating voltage selection
A: set IO level as 5V
B: set IO level as 3.3V (default)DTR selection
A: DTR is connected to P26
B: DTR is disconnected (default)PWR selection
A: PWR is connected to P4 (default)
B: PWR is connected to power supply
