EXTREMEHEAT™ PASTE - 3 OZ
ExtremeHeat™ is formulated to allow for repairs to iron, steel and metal in high temperature environments (1000°F / 537°C). When fully cured, this metallic compound can be drilled, machined or sanded. It is great for repairing cracks, small gaps, seam connections or holes in exhaust manifolds, pipe connections, mufflers, catalytic converters, outdoor grills, fire boxes, gas and commercial furnaces and water heaters. This product is water based, non-flammable and contains no solvents or Volatile Organic Compounds (VOCs).
GREAT FOR:
- Exhaust Manifolds
- Tail Pipes
- Mufflers
- Engine Blocks
- Duct Work
- Heat Exchange Units
- Fire Box / Fire Place
- Outdoor Grills
USE ON:
- Automotive
- Metal
- And More
CLEARWELD™ SYRINGE
ClearWeld™ is a quick setting, multipurpose two part epoxy that provides a strong and lasting bond on most surfaces including tile, most plastics, ceramic, glass, wood and metal. ClearWeld™ is designed to cure with a clear, transparent bond when used at thicknesses of less than 15 mil. ClearWeld™ has a 1:1 mixing ratio, sets in 5 minutes and cures in 1 hour. With a tensile strength of 3900 PSI, ClearWeld™ sets to a hard, permanent bond.
GREAT FOR:
- Tile
- Most Plastics
- Ceramic
- Glass
- Wood
- Metal
USE ON:
- Automotive
- Brick
- Ceramic
- Cloth/Carpet
- Concrete
- Fiberglass
- Glass
- Plastic/Composite/PVC
- And More
PLASTICWELD™ SYRINGE - 25 ML
PlasticWeld™ is a specially formulated two-part adhesive and epoxy filler system that provides for strong, lasting repairs. PlasticWeld™ will bond a variety of surfaces, such as metal, composites, fiberglass and others. PlasticWeld™ sets in 5 minutes at room temperature and is fully cured in 1 hour. Using a 1:1 mixing ratio, PlasticWeld™ combines to a tensile strength of 3900 PSI and cures to a translucent yellow color.
GREAT FOR:
- Most Hard Plastics
- ABS
- Fiberglass
- PVC
- Glass
- Vinyl
- Most Composites
USE ON:
- Automotive
- Ceramic
- Fiberglass
- Plastic/Composite/PVC
- And More
PLASTICBONDER™ SYRINGE - 25 ML
PlasticBonder™ is a quick-setting, two-part, urethane adhesive system that provides strong and lasting repairs and works on thermoset, carbon fiber composites, thermoplastics, coated metals, concrete & more. PlasticBonder™ has a 1:1 mixing ratio, sets in 15 minutes and can be sanded after 30 minutes. With a tensile strength of 3770 PSI, PlasticBonder™ sets to a tan color and cures to a hard, permanent bond.
GREAT FOR:
- Filling Dents
- Bumpers
- Automotive Trim
- Composite Panels
- Interior & Exterior Plastic Parts
- Fiberglass
USE ON:
- Automotive
- Brick
- Ceramic
- Concrete
- Fiberglass
- Plastic/Composite/PVC
- Wood
- And More
KWIKWELD™ SYRINGE - 25 ML
KwikWeld™ is a fast-setting version of The Original J-B Weld two-part epoxy cold weld system that provides strong, lasting repairs to metal and multiple other surface types. After mixing, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. KwikWeld™ has a 1:1 mixing ratio, sets in 6 minutes and is fully cured in 4-6 hours. KwikWeld™ cures to a dark grey color, is rated at a tensile strength of 3127 PSI and will withstand temperatures up to 148ºC / 300ºF.
GREAT FOR:
- Household Repairs
- Automotive
- Plumbing
- Marine
- Crafts & More
USE ON:
- Automotive
- Brick
- Ceramic
- Concrete
- And More
HIGHHEAT SYRINGE - 25 ML
J-B Weld HighHeat is a two-part epoxy system that provides strong, lasting, heat-resistant repairs up to 550°F / 260°C. Mixed at a ratio of 1:1, it forms a permanent bond that has a 4730 PSI / 326 BAR strength and is chemical and fuel resistant. At room temperature, HighHeat sets in 1 hour and cures in 24 hours. HighHeat's cure time is accelerated by heat and can cure in 1 hour at 250°F / 121°C.
GREAT FOR:
- Household Repairs
- Automotive
- Plumbing
- Marine
- Crafts & More
USE ON:
- Automotive
- Brick
- Ceramic
- Concrete
- And More
VAT INVOICE AVAILABLE ON REQUEST.