Principle of Friction
Instruction:
- The compressed air will push the piston
within air cylinder. The upper part of piston and vibrating bar is connected
with the rocking pin, so the vibrating bar will press the lapped part of
packaging belt when moving down.
- There is an elliptic hole at the center
of vibrating bar. This hole is connected with the eccentric shaft of pneumatic
motor. The pneumatic motor rotates at a high speed (10000rpm), so the vibrating
bar conducts reciprocal motion quickly. The lower part of packaging belt is
fixed by the peg teeth of fusion toothed plate, and its upper part is driven by
the peg teeth of vibrator for strenuous friction. Hence, the lapped part of
packaging belt is fused by the heat produced by friction. When the vibration
timer reaches the set time, vibration stops and fusion completes.
- Both upper and lower parts of the
packaging belt are stuck while extruding.
|
Gas Source
Instruction:
Requirement of air pressure The
required scope of air pressure: (5.0-7.0bar) Installation of gas
source Filter, pressure regulating valve and lubricator assembly shall be
close to the pneumatic tool. The min. inner diameter of air hose is 6.0mm(1/4).
Both ends of air supply pipe should be equipped with quick
unions. Moisture filtration A drain valve must be mounted at the
bottom of the air supply circuit's bypass to drain once every
day. Lubrication Pneumatic motor should be lubricated properly, and
the lubricator should be full and well regulated (a drop every
2min). |
Safety
Instructions:
1.Bear in mind "safety-foremost"
principle, and operate this pneumatic tool properly;
2.Read the Manual carefully before
operation;
3.Don't dismantle safety parts of the
tool;
4.Don't tear or damage label or mark of
the product;
5.Don't put hand or other part of your
body between packaging belt and packaging
tool.
Shipping &
Handling Details |
Default Shipping Cost or Free Shipping
Information:
▲ Default shipping cost or free shipping service is
only for the customers from Canada or the lower 48 United States by Canada Post,
USPS or the UPS Ground. Customers from other areas or needs other shipping ways,
please contact us. ▲ Buyers from Guam, Puerto Rico, Virgin Islands, American
Samoa, Alaska, Hawaii, PO Boxes, APO/FPO addresses or other countries/areas,
there WILL be extra shipping costs, please contact us for more detailed
information. ▲ Please make sure your address is valid for both UPS and USPS
services. Any costs incurred because of incorrect or undeliverable address
should be undertaken by buyer.
Handling Time: Shipping is usually
made in 1-3 business days after payments cleared. Orders are processed from
Monday-Friday; Not on the weekends & public holidays.
Sales tax /
Customs duties: Any sales taxes or Customs duties are not included. If came
out, they must be undertaken by the buyer.
Damage In Shipping:
Contact us First! We will work with you to get the case resolved in the fastest
method. |
Return /
Refund |
If you are not 100% happy with your purchase,
please contact Us. Please don't directly opened a request or case without
informing us, or else, we will do some discounts on the warranty and other
sales-services later on. Hope for your understanding.
Returns &
Exchanges
▲ All returns must be made within 14 days of delivery date.
Items must be in new, unused condition, with all original materials included
with the shipment. A partial refund may be applied for opened or damaged items,
depending on the condition. ▲ Items returned under the buyer’s remorse: The
return shipping fee must be covered by the buyer; The original shipping cost
will also be deducted from the refund. 15% restocking fee of the items purchase
price will be charged. ▲ Returns that are the result of our seller's error:
Buyer will receive a full refund of the item as well as shipping charges ▲
All returns require a RA (Return Authorization) number that will be given by our
seller. Please contact with us at first for more details.
Defective
& Damaged Products
▲ If product was received damaged or not as
described, please send us some pictures or videos, so we could well understand
your problem, then solve them for you ASAP. Besides, it's much helpful for us to
claim with UPS, remind our related department to pay much more attention to
packaging later on. Hope for your understanding. ▲ Replacement or refund of
defective or damaged products can only be returned in exchange for the exact
same product, or else, the purchase price will be refunded back to your original
payment method. ▲ If an item is received damaged, customer service must be
contacted within 7 days of receiving your item. All returns require a RA (Return
Authorization) number as above. |
Payment |
eCheck Issues: Payments via eCheck do not
clear immediately. Usually you will wait 5-7 days after checkout for it to
clear. Then we will arrange shipments for you. |
Warranty &
Feedback |
▲ 6 months' warranty for the machines, not for the
consumables. We stand behind our products all the item, so even if your warranty
period has expired, you can still seek for service or technical support from us
with low cost. ▲ Any warranty shipping cost to us is responsible by
buyer. ▲ Any shipping cost to buyer is responsible by the seller. ▲ We
committee to the customer satisfaction and want to bring you the best purchase
experience. If there is any problems, please contact us ASAP. If not, please
leave us a positive feedback as it's very important for us. Thanks very
much. | |