Peugeot Boxer Typ 250 (X250) Compressor air suspension

UK SHIPPING & IMPORT TAXES

This part is shipped directly from our Germany warehouse to you. Because of that, all parts are subject to an Import Tax. This Import Tax can vary depending on the part type and declared value, and the percentage depends on the part type. Please be advised that the Import Tax is not included in the purchase price of this part, and the Buyer is responsible for this cost once they received the part.

Description

This air suspension compressor is only for the replacement of the VB-Airsuspension VB-FullAir 2C (VB-SA 2C) compressor (A1716, 1052111100, 101192-0).
Miessler Automotive® compressors are characterized by the highest quality standard (quality management) and additional scope of delivery.
Replace the supplied working relay.
The additional included important suspension elements for the compressor prevent increased vibration noise.
.
Can be installed in the following vehicles: 
Peugeot Boxer Typ 250 (X250) 2006--
.
Original spare part number of the air supply system:
VB Airsuspension 1052111100, 101192-0, AMK A1716 
.
Scope of delivery:
Compressor
Mounting parts set 1352131037
.
CAUTION: The replacement of the relay is mandatory, otherwise the warranty on the compressor is forfeited!
.
Before you buy a compressor please keep in mind that the main reason a compressor fails is because there is a leak in the Air Suspension System causing the compressor to overwork and "Burn Out". The most common cause for a leak in the system is an old leaky air spring bag. Your compressor warranty will be voided if air spring bags have not been recently replaced in your vehicle. We recommend that in order to maintain your Air Suspension System in optimal condition you purchase new air spring bags.
Filter and suction hose should be changed in any case. For one, the suction is usually porous and brittle. Secondly, the filter should be replaced when the compressor is changed. Otherwise there is no factory warranty.
.
Your advantage:
- Assembly and quality assurance by Miessler Automotive® Germany
-Much cheaper than authorized repair
-Personal advice
-We as German provider have the European returns policy
-We also have a 2 years warranty
-Worldwide express delivery is our standard
-In Europe we have the longest experience with the topic of air suspension for automobiles in the after market.
.
Our technical advise for the air supply device:
1. Increased noises while the compressor is running may be caused by a non-functioning compressor mounting.
Change the rubbers and springs of the  mounting in any case.
2. A porous intake hose often is the cause for a breakdown of the compressor. 
Change the intake hose and preferably also the filter and noise absorber, because we do not want the compressor to breakdown because of these.
3. Be sure to check whether the system is leakproof after repairing.
The easiest way to do this is to park the vehicle. Wait for the system to automatically re-adjust if your car has this feature.
Then measure the heights from the ground to the lower edge of the fender as exactly as possible and take notes.
On the day after measure these heights  again and compare them with the ones before. Even a small difference will lead to a damaged compressor and damaged valves in the long run.
.
When driving with a leaking suspension for a long time it needs to be assumed that the compressor is running more often than normal. The increased number of cycles of powering on and off is likely to already have damaged the compressor.  Depending on the duration of that condition you should change the relays and check the performance of the compressor to be on the safe side. After the vehicle stood overnight the compressor normally doesn't need to run more than 20 to 30 seconds for the system to be ready to start.

---