These are a perfect replacement for the VW T4 please look at how many pins you have before you purchase.

(if you have 3 pins this will not work)

  • It is used to feed a power in to the sliding doors for central locking and car alarm installation. 
  • Also it can be used for electric windows, speakers or any other electric application 
  • Sliding door contact designed to easily get power to the door lock actuators mounted in the sliding door on vans

 Package Contents:
  • 1x Kit (per door) Sliding Door Contacts

 



Notes *
Note 1. Central Locking
If your central locking system only operates from the drivers door key (not the passengers);
then you will need a   2 wire motor for your drivers door.
 
Note 2. Total Closure / Window Closure
If your vehicle has total closure this kit will close the windows without any additional interfaces.
You can tell if your vehicle has total closure if the windows close when you hold the drivers door key in the locked position.
If you don’t have total closure and want to close the windows when the alarm is armed;
then you will need a  window closure module.

Note 3. Boot Release Wire: Trunk  Release Output
Some cars have an electric boot release or one can be added. This can be  interfaced with this kit.
For cars with a built in boot release the wire is  found at the keyless entry module under the dash
or behind a kick panel. If  you want to Convert your manual boot release to electric release;
then you  will need a  Electric Boot Release Kit 

 

Note 4. Cable operated door locks
For vehicles with cable operated door locks, such as Ford, Mercedes  Sprinter/Vito, and some newer cars, You need this additional item:  Allows aftermarket actuators to work with cable door lock systems

  Cable door lock adaptor