Tips:
Question:
Please, tell me is this machine made by Mr.Efim or is it just his diagram and drawings?
Answer:
No this is the Replica 😊.
Description:
Universal sharpening device EFIM-2™ designed by Mr.Efim Dreer (Canada) - the father of all: TSPROF™, Hapsone™, Vector+™, and etc. to maintain predetermined angles when forming and sharpening angular blades.
EFIM-2™ knife sharpening system MADE IN CANADA - custom and exclusive from Mr.Efim by himself (!) - Author's Lifetime Warranty from Mr.Efim !!!
This sharpening system is the manual made product of the Efim Dreer wizard, and does not (!) have a user manual - see the video: https://youtu.be/6WsZZ3epMBY
(THIS PRODUCT FOR PROFESSIONALS ONLY).
In the basic configuration, the device serves for sharpening, finishing and straightening blades of the knife. On par with Edge Pro™ Wicked Edge™ Lansky Sharpeners™ Wicked Edge go™ and the KME Sharpener™
AND much BETTER - see the video where TSPROF won the challenge: https://youtu.be/sWcTv8Uqesg (Because Efim-2™ much BETTER the TSPROF, it mean it'll be win for sure!)
Design features:
Sharpening is carried out from one installation;
The clamps are designed to sharpen the knives with any type of blade and their complicity;
Clamps are interchangeable for ease of use with any size of the knife and its forms;
Comfortable holder of abrasives allows promptly reinstall various bars and other tools;
Retractable telescopic tool allows to adjust sharpening angle of the blade the kit also has two steps adjustments that make it more compact by height and at the same time provides smooth stroke adjustments for any angle;
Tough monolithic design made of high-quality steel, stainless that is corrosion resistant, decorative coatings provide reliability and durability of the kit;
Screws on clamps are made of high-quality steel.
THE KNIFE SHARPENER KIT COMES WITH PRECISION WORKING 180 DEGREE ROTATING BLADE CLAMP WHICH ALLOWS TURNING KNIVES BLADES FOR SHARPENING WITHOUT TAKING OUT KNIFE
ADJUSTABLE EDGE SHARPENING ANGLES, FROM 10, 15, 18, 21, AND 24 DEGREES (PROFESSIONAL) OR ANY FROM 8 TO 70 DEGREES, PRECISION 0.1 FOR ALL KNIFE TYPES FOR KITCHEN, CHEFS, HUNTING
THIS PRO SHARPENER SYSTEM COMES WITH FIVE WATER STONES: # 120 GRIT (COARSE), 220 GRIT (MEDIUM FINE), 400 GRIT (FINE), 500 GRIT (EXTRA FINE), 800 GRIT (ULTRA FINE)
KNIFE SHARPENER SET COMES WITH LOCKING MECHANISM FOR SHARPENING STONE ARM AND DIFFERENT KINDS OF CLAMPS WHICH ALLOW TO SHARPEN PERFECTLY ANY KINDS OF KNIVES LIKE SPECIAL CHEFS, KITCHEN, HUNTING IN ANY SHARPENING ANGLES
Attention:
We do not use threads in aluminum in critical places, only a steel-to-steel bond in the production of this sharpening machine (TSPROF used to a lot of threads in aluminum in critical places!). So in the blade clamps, the quick angle adjustment unit, there are pockets for captive nuts, in case of a thread break they can be easily replaced. All screws and winglets are made of steel.
Oversized steel base made of 8 mm thick steel. allows not to fix the machine to the table with additional devices.
The swivel mechanism is made on rollers 8 * 12 mm., bushings made of "ZEDEX" polymer are installed inside, which guarantee the absence of backlash.
An additional thrust bearing is installed on the pressure lamb, which eliminates spontaneous changes in the spring pressure force.
The horizontal guide, 650 mm long, is made of a surface-hardened polished shaft with a diameter of 8 mm.
The angle adjustment mechanism is made using ball screws.
The angle range is from 5 to 31 degrees per side.
Adjustment is made steplessly with an accuracy of 0.05 degrees.
The sliding unit is made on bearings, the polymer bushing is Zedex material. The ball screw is made by grinding and has a surface hardening. Mounted on two pairs of ball bearings.
The ball screw nut is steel, it consists of a body with return channels and steel balls, anthers are located at the ends of the nut.
The additional guide is made of a 12 mm surface hardened polished shaft, a linear bearing is used for smooth running.
The screw supports and the ball screw nut holder are made of D16T alloy, thickness 20 mm.
The rotation washer is made of D16T alloy with a thickness of 20 mm. For ease of use, it has a knurling on an outer diameter of 60 mm.
This sharpening machine encluded:
Apex type abrasive holders.
Clamps size standard 2 pcs.
Parking horizontal guide.
Spring limiters of the course of a horizontal guide.
Assembly key for work
Specifications:
Sharpening angle: 11 to 30 degrees per side
Rotary mechanism: 2 positions
Materials: Steel ШХ15. Steel ST3. Brass L63T. Alloy D16T
Blade size to be sharpened: 20 to 300 mm.
Weight 8 kg.