Product features:
The product supports single channel capacity and internal resistance measurement
Support separate charging and discharging, and support up to 9 charging and discharging cycles in automatic mode
The stop discharge voltage is adjustable in 11 gears
Using DC two-wire method to test internal resistance Chinese English switchable
The maximum charging and discharging current is about 1A
Note:
During the charging and discharging process, some components will produce local high temperature. Please ensure that the use environment is open and uncovered. It would be better to increase the fan heat dissipation.
In order to ensure that the battery clip is firm, the 18650 battery holder uses a compact battery holder, which is suitable for flat battery measurement!!!
It does not support charging of lithium iron phosphate battery
Basic parameters
Working power supply: DC5V power supply or 18650 battery (self prepared)
Applicable battery: all batteries that meet the requirements of 2.5~3.5V stop discharge voltage and 2.8~4.2V full charge voltage are applicable
Power supply interface: Type-C interface, self provided power supply line (C-port mobile phone line)
System language: Chinese (default), English
Test quantity: 1 circuit charge and discharge measurement (only for the right battery position)
Internal resistance measurement: Yes, DC two-wire method is used to measure the internal resistance
Charging function: support, automatic cut-off charging when fully charged (does not support charging of lithium iron phosphate battery)
Discharge function: support, automatically stop when conditions are met, and the discharge current is not adjustable
Automatic charging and discharging: Yes, the battery is fully charged at the end of automatic mode
Cyclic charging and discharging: supported, adjustable for 1~9 cycles (only supported in automatic mode)
Status prompt: Supported
Stop discharge voltage: 2.5V, 2.6V, 2.7V, 2.8V, 2.9V, 3.0V, 3.1V, 3.2V, 3.3V, 3.4V, 3.5V, 11 adjustable
Discharge current: two circuits of resistance, the maximum current is about 1A, which cannot be adjusted and does not support independent transformation
Charging voltage: controlled by special battery charging chip, the maximum charging voltage is about 1A, and the full charging voltage is 4.2V
Save in case of power failure: save only the setting parameters, not the metering data
Product weight: 80g (net weight) 120g (including packaging)
Product size: 110 × eighty-eight × 30mm
Package size: 153 × one hundred × 42mm
Information link: https://www.banber.com/banber/63759cb5186c0a15f2d2d4c0.html
Package list:
18650 Battery capacity internal resistance tester X1
The product supports single channel capacity and internal resistance measurement
Support separate charging and discharging, and support up to 9 charging and discharging cycles in automatic mode
The stop discharge voltage is adjustable in 11 gears
Using DC two-wire method to test internal resistance Chinese English switchable
The maximum charging and discharging current is about 1A
Note:
During the charging and discharging process, some components will produce local high temperature. Please ensure that the use environment is open and uncovered. It would be better to increase the fan heat dissipation.
In order to ensure that the battery clip is firm, the 18650 battery holder uses a compact battery holder, which is suitable for flat battery measurement!!!
It does not support charging of lithium iron phosphate battery
Basic parameters
Working power supply: DC5V power supply or 18650 battery (self prepared)
Applicable battery: all batteries that meet the requirements of 2.5~3.5V stop discharge voltage and 2.8~4.2V full charge voltage are applicable
Power supply interface: Type-C interface, self provided power supply line (C-port mobile phone line)
System language: Chinese (default), English
Test quantity: 1 circuit charge and discharge measurement (only for the right battery position)
Internal resistance measurement: Yes, DC two-wire method is used to measure the internal resistance
Charging function: support, automatic cut-off charging when fully charged (does not support charging of lithium iron phosphate battery)
Discharge function: support, automatically stop when conditions are met, and the discharge current is not adjustable
Automatic charging and discharging: Yes, the battery is fully charged at the end of automatic mode
Cyclic charging and discharging: supported, adjustable for 1~9 cycles (only supported in automatic mode)
Status prompt: Supported
Stop discharge voltage: 2.5V, 2.6V, 2.7V, 2.8V, 2.9V, 3.0V, 3.1V, 3.2V, 3.3V, 3.4V, 3.5V, 11 adjustable
Discharge current: two circuits of resistance, the maximum current is about 1A, which cannot be adjusted and does not support independent transformation
Charging voltage: controlled by special battery charging chip, the maximum charging voltage is about 1A, and the full charging voltage is 4.2V
Save in case of power failure: save only the setting parameters, not the metering data
Product weight: 80g (net weight) 120g (including packaging)
Product size: 110 × eighty-eight × 30mm
Package size: 153 × one hundred × 42mm
Information link: https://www.banber.com/banber/63759cb5186c0a15f2d2d4c0.html
Package list:
18650 Battery capacity internal resistance tester X1
1.We accept PayPal payment ONLY, and must be received within 5 days from the date of purchase.
2. It is easy and safe for you to pay by credit cards, debit cards, bank transfers and PayPal account balances.
3.Buyers are responsible for import duties,custom fees and taxes, if any, please check your country.
1.We only ship to the confirmed address provided by eBay. please make sure your ebay address is 100% matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.
2.Orders will be processed instantly and dispatched within 1-2 business days except hoilday, so we do NOT accept any email/message note after you place orders.
3.All package need to wait 30 days,Please take care it.Less than 30 days,we can't take a refund.
1.We believe our items are so outstanding. We are convinced you will be happy with your Purchase.
2. If you do not satisfy with our items. Please simply return to us within 30 Days in original condition. Just pay for the returned postage. Then we can issue full refund or resend the item to you after the returned item arrived at our warehouse.
3. Please include your eBay ID and item number with any email requests.
2. If you do not satisfy with our items. Please simply return to us within 30 Days in original condition. Just pay for the returned postage. Then we can issue full refund or resend the item to you after the returned item arrived at our warehouse.
3. Please include your eBay ID and item number with any email requests.
1.We greatly appreciate your POSITIVE feedback. Please do NOT leave negative feedback without asking for help.
2.Please DON'T leave negative or neutral feedback if you haven't received item in 30 days, because we have mentioned the shipping time repeatedly.
2.Please DON'T leave negative or neutral feedback if you haven't received item in 30 days, because we have mentioned the shipping time repeatedly.
1. If you have any questions, please feel free to email our service specialists.
2.Just contact us using the " Ask the seller a question" link on eBay.
3.Our aim is to provide Top Level Customer Service, normally so we will try our best to solve any problem.
2.Just contact us using the " Ask the seller a question" link on eBay.
3.Our aim is to provide Top Level Customer Service, normally so we will try our best to solve any problem.
Am 24.02.2023 hat der Verkäufer die folgenden Angaben hinzugefügt: