Specical Detection For EVAP Der SDT101 kann durch den Anschluss einer externen Luftquelle und einer 12V-Batterie verwendet werden. Es ist mit einem eingebauten Druckregler ausgestattet, um den Ausgangsdruck auf 3,2Kpa (0,46psi) zu fixieren, der speziell für die Prüfung des EVAP-Systems geeignet ist, um zu verhindern, dass die EVAP-Rohre durch übermäßigen Druck beschädigt werden. The SDT101 can be used by connecting an external air source and a 12V battery. It is designed with a built-in pressure controller to fix the output pressure at 3.2Kpa(0.46psi),which is especially for EVAP system testing to prevent EVAP pipes from being damaged by excessive pressure. | Overhested protectionÜberhitzungsschutz: 80℃ & Anti-Frost-Schutz: -15℃ Der Schutz verlängert die Lebensdauer der Maschine. Wenn es die Arbeitsgrenze überschreitet, wird es automatisch den Strom abschalten. Bitte bedienen Sie es später. Overheat Protection: 80℃ & Anti-frost Protection: -15℃ The protection extend the service life of machine. If it exceeds the working limit, it will automatically turn off the power. Please operate it later. | Wide Range of Applications SDT101 Zum Aufspüren von Leckagen in Rohrsystemen von Autos, Motorrädern, Schneemobilen, Geländewagen, ATVs, leichten LKWs und Schnellbooten. Geeignet für alle Automodelle. SDT101 For detecting the leakage of pipe systems on cars, motorcycles, snowmobiles, off-road vehicles, ATVs, light trucks and speedboats boats. Suitable for all car models. |
1. When you use this Car Smoke Leak Detector for the first time, fill it with 10ml baby oil. Please be careful NOT to beyond this range.
2. The testing liquid: both liquid paraffin and baby oil are OK.
3. Fresh oil can be filled with only when the smoke gets thin, and it can’t be filled over 20ml each time.
4. Before filling fresh oil, please pour out the left oil in the detector & replace the detector oil regularly.
5. During the process of leak detection, please keep away from smoke-sensitive parts.
6. Do NOT run the detector over 8 minutes continuously. It needs interval rest.
7. The round part of this detector has temperature, please be careful to avoid burns.
8. If the test pipe needs to be disconnected in the middle, please secure the other side with a rubber stopple.
9. Follow the instructions
SPECIFICATIONAmbient Temperature: -10℃ ~ + 40℃ Relative Humidity: <85% Test Oil: Mineral oil or baby oil Multi Protections: Oil outlet, over-heat and over-load protection Main unit weight:1.6KG Package weight:2.4KG Output pressure:3.2Kpa(0.46psi) Air pressure output:External air source Power supply:DC12V battery | PACKAGE INCLUDES1pc * SDT101 1pc * Standard Cone Adapter 1pc * Power Cord Clamp 1pc * Valve Core Wrench 1pc * Test Oil Refill Bottle 1pc * EVAP Special Connector 1pc * Smoke Hose 1pc* Manual Book |