IFLIGHT BLITZ F7 Pro Flight Controller with OSD 35x35 BLITZ E80 4-IN-1 Pro 80A ESC (G2） Straight PLU FPV Crossover For RC Drone
BLITZ E80 4-IN-1 Pro ESC (G2）：
The
MOSFET used by BLITZ E80 is PSMN1R0-40YLD, which can withstand a
continuous current of 80A at 25°C, with a maximum power dissipation of
198W. BEC power supply adopts TI automotive-grade dedicated synchronous
rectifier chip, supporting up to 100V.
The 1-4
layer power board of the PCB circuit is ultra-thick copper with a
thickness of 4OZ, ensuring continuous output under high-power operation.
The STM32F051 main control processor with a running frequency of up to
48MHz, combined with a three-in-one driver IC, achieves a faster running
speed!
Features:
Rational layout, countersunk holes on extended solder pads to ensure PCB layer connection
G071 MCU, 48mHz maximum clock speed;
TDK MLCC Low ESR ceramic capacitors;
Top grade PSMN1R0-40YLD MOSFET;
8 layers double-sided PCB board
Specification:
BLHeliSuite download (BL32): https://github.com/blheli-configurator/blheli-configurator/releases
Supports DShot DShot150/300/600/MultiShot/ OneShot etc.
Constant current：80A，100A（Burst）
Mounting Holes: 35*35mm/Φ3mm
Current sensor: Yes, scale 100
Firmware: IFLIGHT_BLITZ_G2
Telemetry: Supported
Weight:65g(±10)
Volts input: 2-8S
BEC: No
BLITZ F7 Pro Flight Controller
- Improved circuit design, better components, and lower electrical noise!
- DJI HD VTX Connector (Plug-and-Play / No soldering required)
- FC indicator LEDs for visual debugging
- 512MB BlackBox
- With LC filter
Specifications:
Mount pattern: 35*35mm/ 4mm PCB hole diameter
Smartaudio / IRC Tramp VTX protocol supported
Firmware target: IFLIGHT_BLITZ_F7_PRO
Input Voltage: 14.8V-34V (4S-8S LIPO)
Motor outputs: 4x (SH1.25 connector)
Flash: 512MB (Blackbox flash)
I2C serial: SDA / SLA pads
Dimensions: 41*41.5mm
Barometer: DPS310
OSD Chip: AT7456E
LED controller: Yes
MCU: STM32 F722
Weight: 17g (±2)
Beeper pad: Yes
Gyro: BMI270
UARTS: 6
Wiring suggestion:
- UART1 for VTX HD/Analog
- UART2 for Receiver
- UART4 for GPS
- UART5 for ESC Telemetry
- 8×Dshot/PWM outputs
- 1×I2C for GPS Mag
Tips
1. F722 MCU has an inner inverter.
2. SBUS,CRSF,ELRS,IBUS,DSM ETC... can be connected to any unused UART_RX, we suggest you connect to Uart_RX2
3. Frsky SmartPort, Tramp & Smartaudio can be connected to any unused UART_TX, we suggest you connect to Uart_TX1
4. F.port can be connected to any unused UART_TX, we suggest you connect to Uart_TX2
Shipping:
- The shipping costs to all countries are the same.
- Item will be shipped within 1-2 business days
- Items will be checked carefully before sent out.
- We will use air bubbles to wrap the items carefully
Sales Tax:
Sales Tax Depends on the import tax policy of your country.
Warranty & return:
- For ensuring all the items are in good quality, we will test all products before the packages were sent out .
- 30 days warranty from the purchased date. Please contact us via email before returning the defective item.
- Return items should include the original packaging and all accessories.
Only defective product will be offered exchange.
Contact us :
Our office hours are :
- 8:30 a.m. to 6:00 p.m. (GMT +8) of Monday
to Friday
- 8:30 a.m. to 1:00 p.m. (GMT +8) of Saturday
- 8:30 a.m. to 6:00 p.m. (GMT +8) of Sunday
- Our office is closed on public holidays (China). We apologize for the late reply during the holidays.
We have always been trying to provide the best service and reliable products for every customer. Please contact us to resolve any issue before leaving negative feedback . we will assist you in any way possible and aim to answer all emails .
