Features:
l 12V voltage, 22MM handlebar inner diameter, suitable for most motorcycles
l The product has a high and low switch, and the handle temperature can be adjusted at will (50℃-70℃ adjustable)
l Double throttle cable buckle, wider installation range
l The design can be sealed and open, which does not affect the installation of the handle on the outside of the handle, so that decorative accessories such as lights can be placed, which is more beautiful and convenient
Specification:
l Net Weight: 236g
l Color: Black
l Left Handle Length: 143x36mm
l Right Handle Length: 127x36mm
l Handle Diameter: 22mm
l Input Voltage: 12V
l Product Power: 12W-24W Adjustable
l Handle Temperature: 50℃-70℃ Adjustable
l Switch Type: Multi-Gear Adjustable Switch
l Applicable Models: 12V Motorcycles With a Handlebar Diameter Of 22mm
Precautions:
l When installing the left handle, do not twist the handle too much, as excessive twisting will cause the heating wire to shift
l For models with balance iron, please adjust the installation position of the balance iron, do not squeeze the handle when tightening the screws, and the balance iron and the handle are slightly separated. If the installation position of the balance iron cannot be adjusted, please add a spacer between the balance iron and the handle to separate it. Excessive squeezing of the handle will cause the handle switch to be difficult to toggle, and the heating wire will be pushed out of the handle surface and other abnormal damages.
Installation Notes:
l Remove the original handlebar
l Wet the inner hole with soapy water with the left hand, and do not twist too much during installation
l When installing the balance iron on the left-hand handle, adjust the position of the balance iron to be slightly separated from the handle, and do not squeeze the handle when tightening the screw
l In use, slide the left handle on the steel pipe, remove the balance iron, and fix it with a few drops of 502 glue from the end of the handle
l Power cord, red wire is connected to positive, black wire is connected to negative, reverse connection temperature cannot be adjusted
l When the left-hand handle is installed, the power cord should leave enough wire for turning
Package:
l 1x Handlebars