⚠WARNING: This product may expose you to chemicals, including toluene, which is known to cause birth defects or other damage to the reproductive system. Always wear protective clothing, gloves and glasses and use in a well-ventilated area.


Shoe-Goo Original ELASTIC glue for shoes and clothes

Shoe-Goo Original has been scientifically developed to repair, seal and stick to a wide variety of high-strength materials than other brands. SHOE GOO features a resin system designed for greater abrasion resistance and better adhesion to flexible materials. Leather, rubber, vinyl and canvas - SHOE GOO is the most versatile and effective adhesive on the market.

Applications:

  •     Rebuild worn soles overnight
  •     Seal rubber boots, galoshes and waders
  •     Cover and protect your shoes to avoid premature wear
  •     Repair damage to the heel pads
  •     Secure loose insoles
  •     Strengthen and protect skate shoes; skateboard coat for extra grip
  •     Waterproofing of shoes, clothes and accessories

Permanently repair / secure all types of shoes!

    Perfect adhesion to: leather, canvas, suede, rubber, fabric and many other surfaces!
    Dries crystal clear
    The highest level of flexibility of any glue (900%)!
    Permanent bond
    Excellent water resistance
    Abrasion resistant (perfect for skaters!)
    Paintable (after 24-hour curing)

** Shoe-Goo Original adhesive is not UV resistant, but can be painted over to achieve this effect


Before use: Read the instructions and test the adhesion in a small area. Use in a well-ventilated room !!!

The surface should be clean, dry and free from dirt. For best adhesion on smooth, non-porous materials, lightly sand before use. The ideal application temperature range is 10 to 35 ºC. After complete hardening, the adhesive can withstand temperatures from -40 to 66 ºC intermittently.

Not recommended for use on polystyrene, polyethylene, polypropylene, Styrofoam™ or paper products, and any items that come into contact with food, drinking water or animals.

Specifications:

Curing time: It should take 24-48 hours to fully cure. Depending on the substrate and temperature, the maximum bond strength can be reached after 3 days.

Cleaning: Clean uncured adhesive with alcohol, spirit or a dry cloth. Hardened material can be removed with white spirit or by cutting or scraping.

Waterproof: yes.

Temperature range: Once fully cured, the adhesive will withstand a periodic temperature of -40 to 82 ºC.

UV resistant: No.

For use on: leather, canvas, suede, rubber, fabric and more!

Use of skateboarding shoes: The Shoe GOO Original will provide a barrier to those extremely vulnerable areas that require extra protection. It will also easily perform any necessary repairs.

Storage: Remove air from tube by squeezing the product almost to the end of the opening after use, then seal tightly. Store in a cool, dry place away from direct sunlight.



---- POLSKI ----

⚠OSTRZEŻENIE: Ten produkt może narazić Cię na działanie substancji chemicznych, w tym toluenu, o którym wiadomo, że powoduje wady wrodzone lub inne uszkodzenia układu rozrodczego. Zawsze noś odzież ochronną, rękawice i okulary i używaj w dobrze wentylowanym pomieszczeniu.

Shoe-Goo Original zostały naukowo opracowane, aby naprawiać, uszczelniać i przyklejać się do szerokiej gamy materiałów o najwyższej wytrzymałości niż inne marki. SHOE GOO zawiera system żywic zaprojektowane dla większej odporności na ścieranie i lepszej przyczepności do elastycznych materiałów. Skóra, guma, winyl i płótno – SHOE GOO to najbardziej uniwersalny i skuteczny klej na rynku.

Zastosowanie

Trwale naprawiaj / zabezpieczaj wszystkie rodzaje obuwia!

** Shoe-Goo Original nie jest odporne na promieniowanie UV, ale można je pomalować, aby uzyskać taki efekt


Przed użyciem: Przeczytaj instrukcje i przetestuj przyczepność na małym obszarze. Stosować w dobrze wentylowanym pomieszczeniu!!!

Powierzchnia powinna być czysta, sucha i wolna od brudu. Aby uzyskać najlepszą przyczepność na gładkich, nieporowatych materiałach, przed użyciem lekko zeszlifować. Idealny zakres temperatur aplikacji to 10 do 35 ºC. Po całkowitym utwardzeniu klej wytrzymuje chwilowo temperatury od -40 do 66 ºC.

Nie zaleca się stosowania na produktach polistyrenowych, polietylenowych, polipropylenowych, styropianowych™ lub papierowych oraz wszelkich przedmiotach, które mają kontakt z żywnością, wodą pitną lub zwierzętami.


Czas utwardzania: pełne utwardzenie powinno zająć 24-48 godzin. W zależności od podłoża i temperatury maksymalna siła wiązania może zostać osiągnięta po 3 dniach.

Czyszczenie: nieutwardzony klej wyczyść alkoholem, spirytusem lub suchą szmatką. Utwardzony materiał można usunąć benzyną lakową lub przez cięcie lub skrobanie.

Wodoodporność: tak.

Zakres temperatur: Po całkowitym utwardzeniu klej wytrzymuje okresowo temperaturę od -40 do 82 ºC.

Odporny na promieniowanie UV: Nie.

Do użytku na: skórze, płótnie, zamszu, gumie, tkaninie i wielu innych!

Użycie butów do skateboardingu: Shoe GOO Original zapewni barierę dla tych ekstremalnie narażonych obszarów, które wymagają dodatkowej ochrony. Z łatwością wykona również wszelkie potrzebne naprawy.

Przechowywanie: Usuń powietrze z tuby, ściskając produkt prawie do końca otworu po użyciu, a następnie szczelnie zamknij. Przechowywać w chłodnym, suchym miejscu z dala od bezpośredniego światła słonecznego.