About this item

• 【Bluetooth Technology】: With Bluetooth connectivity, users can control the setup of the laser from across the room with smart phone and the Huepar App. Huepar App is available for free download and use, which allows you to switch ON/OFF the laser lines and pulse mode, select the laser plane(s), adjust the line visibility and provide an out-of-level alarm.
• 【Multifunctional 2 X 360 Laser Tool】: One 360° horizontal and one 360° vertical planes enable users to cover the floor, wall, ceiling all around the room. The three laser lines can be selected individually depends on job site applications. With our smart pendulum system, this laser level tool self-levels and indicates out-of-level condition while pendulum unlocked. Once pendulum locked, it switches to manual mode to lock lines for use at any angle.
• 【Triple Power Technology】: This 360 laser tool employed the included large capacity lithium battery (can be purchased easily at local market) for extended run-time, or with 4 AA alkaline batteries. In addition, this laser tool can be used at job site with direct input charging even if take out the battery. Charging protection help prevent the tool from overcharge. 4 battery indicators on keypad allow users to know the current battery volume anytime.
• 【Visibility Adjustable & Pulse Mode】: This laser level projects green laser beams which up to 4X brighter than standard red beams. Connect the laser tool and the Huepar APP to adjust the brightness of the laser according to work or environment needs, it can also extend the overall battery life of the line laser. The outdoor pulse mode can extend the laser range up to 60m with Huepar Line Laser Detector in bright-light or outdoor conditions.
• 【Durable Design & Warranty】: Over-molded metal laser window with IP54 water/dust resistance ensures you work well in hazardous working conditions. The laser tool also offers 1/4"-20 and 5/8"-11 mounting threads to suit different tripod threads. A strong magnetic pivoting base allows for attachment to metal track and steel.

Specifications for Huepar 2 x 360° Green Laser Level S02CG:

Projection: 2 x 360° Green Laser Lines

Laser Class: Class 2 (IEC/EN60825-1/2014), <1mW power output

Laser Wavelength: 505-520nm

Horizontal / Vertical Accuracy: ±1/9 Inch at 33 Feet

Leveling / Compensation Range: 3.5°±1°

Leveling Time: ＜3s

Working Distance: 65 feet (300 LUX), 200 feet with Huepar Laser Detector LR-5RG / LR-6RG

Power Source: 7.4V / 2600mAh Li-ion Battery

Reference Operating Time: About 8 hours with all laser beams ON

Mount Size: 1/4"-20& 5/8"-11

IP Rating: IP54 dust-proof, waterproof and shockproof, reliable and tough

Operation Temperature Range: Between -10℃ and +50℃

Storage Temperature Range: Between -20℃ and +70℃

WARNING: Do not point the laser beam directly into the eyes. The device is a laser class 2 laser product according to IEC / EN60825-1 / 2014. It is allowed to use the device without any further safety precautions. The eye protection is usually secured by aversion reactions and blink reflex.

Smart Pendulum - Self-leveling Mode & Manual Mode:

Self-leveling Mode:

When the laser tool is switched to the unlocked position, the self-leveling mode is enabled.

The line laser will beep when out of self-leveling range ±3.5°.

Manual / Tilt Mode:

When the pendulum locked, the laser tool can be placed for alignment at any angle.

The laser beam will blink every 3-5 seconds to remind you that it's not self-leveling now

Easy Operation

Green Laser Target Plate: Increases the visibility of the laser beam.

360° Strong magnetic bracket: Allows being adsorbed onto metal track and steel. the laser tool can be rotated to the required angle.Two strong magnets allow for attachment to metal track and steel .It can meet different angles required in many jobsite.

The attached metal wall panel provides more fixing methods when working.

2 x 360° Multiple Line Switching Functions:

This laser level allows users to line up level, align, square and plumb by generating two 360° laser planes - One 360° horizontal and one 360° vertical planes enable users to cover the floor, wall, ceiling all around the room.

The horizontal line and vertical lines can be selected individually by pressing the independent H and V button on the keypad.

The horizontal line, vertical line and combined laser lines can be selected individually depends on different job site applications.