Detachable / Removable Twin Plate Holder Platform for Private Hire cars, Taxi's & Minicabs, please chose the product/ combination of products to suit your requirement
NO
need to make holes in the bumper or body of your lovely car, simply mount
the Detachable Twin plate holder on top of your existing long number plate when
you are working or dismount/remove when finish your shift or not working.
Its very simple, takes seconds to click it on or remove it.
watch
the YouTube video
on the following link!
https://youtu.be/Lj8D3CK7QW8
Follow the link below to see how to
assemble the Twin Plate holder platform
https://youtu.be/ih_7Gh2zVAk
Detachable twin plate brackets : If
you do a private hire, Chauffeur or taxi trade driving and if you are not
working or using you vehicle with the family and friends for social and
domestic use, you can chose (if you are allowed) not to display the Private
Hire/Taxi plate bracket at the back/front of your decent car. In similar
situation It always gives a good impression to drive a decent looking car
without the council plate (see our disclaimer notice given below)
And when you mount our "Twin
Plate Bracket" at the back/front of your car, it will give a much nicer
and decent look with the two plates attached side by side, instead of
license plate drilled/screwed mounted on you bumpers or body of the car
which infect damages all these expensive decent cars
Simply try our "Detachable Twin
Plate bracket" to attach both plates (DVLA & Council plate) side by
side. It fits precisely on top of existing rear number plate and in to the
number plate space as shown in the pictures and video. If you some reason it
doesn't fit-in or you wanted to return it, we have a no question
asked policy and will refund you with-in 30 days after the purchase.
This metal-based platform is designed with having 4 clips at the back, so it could be mounted on top of an existing registration number plate. It is a detachable platform, therefore you can mount it in seconds when working and can easily be detached when finished working. The platform is strong enough to hold both, Council license plates & square Reg. plate side by side as shown in the pictures. It’s a solution to prevent the damage to the car’s body/ bumper by making screw holes to attach/display the council plate - PLEASE SEE DISCLAIMER NOTE ND FOLLOW YOUR LOCAL COUNCILS POLICY FOR PLATES ATTACHMENT, DISPLAY LOCATIONS AND DURATION.
****** IMPORTANT - PLEASE READ ******
Note : We will provide you the metal
base platform with the set of 8 self-tapping screws and 4x metal washers. We
will not be providing the council license plate holder or DVLA Registration
number plate; these are shown here for the illustration purpose only.
DISCLAIMER NOTICE : The way in which license
plate and other identification products are displayed on private hire and
commercial vehicles are decided by your local licensing authority. It is not a
matter for this company to advise or suggest. Different local councils have
varying rules and it is buyer’s (owners/drivers of the vehicles) responsibility
to check with their local council rules and make sure before purchasing any of
our products (brackets, plate holders or twin plate bracket/platforms etc.)
that their use, attachment and position on the car/vehicle is compliant with
the terms and conditions which apply to their licence/permit.
. If our products are not suitable to
your vehicle for any reason please contact our customer service for a return
and refund. We have “no questions ask” policy and will refund you the full
amount as soon as possible. For information regarding our “returns policy”
please see reverse side of leaflet
Deterioration of springs and other
metal/plastic components: Springs should be replaced if you see the signs of wear
due to extensive use. To order go to www.dynx.co.uk
Plastic coating on mounting clips: A pair of new mounting clips should be purchased and replaced if you see signs of wear/damaged plastic coating due to extensive use. The purpose of plastic-coated mounting clips is to protect your car from getting scratch while mounting.
Detachable Twin Plate Brackets – Please
note: (1). We will provide you the metal base platform with the set of 12
self-tapping screws and 4x metal washers. We will not be providing the council
license plate holder or DVLA Registration number plate; these are shown in the
pictures for the illustration purpose only. (2). You will be required to
make square DVLA registration number plate (motorcycle style) recommended size
is 11 inch wide x 8 inch high. (3). The size of the Detachable Twin Plate
Bracket (including council /DVLA number plate fitted) is approximately 53cm
wide and 21cm high, It will need an approximate 21 inch x 9 inch (53cm wide x 23cm
high) space to operate while mounting or removing it from the top of existing
long number plate. (4). We would like to advise that your existing DVLA
long plate should be fitted and secured with multiple screws/washers (and NOT
with the double-sided sticky tape). (5). Use small washers at the back of
the fitted number plate to give it enough space for the plate holder bracket
clips to take proper secure grip. (5). Please avoid using double sided
sticky tapes to attach any of the plates on platform bracket or car number
plates.
POSTAGE : To the best of our
abilities, orders will be posted before the mentioned deadline give within
product listings, normally a next day dispatch, however in occasions in
which have to pass-on the orders to our third-party suppliers or
suppliers from abroad, the delivery /dispatch deadlines may take longer then
expected. We try our best to clearly mention an approximated delivery date for
those products/orders with longer delivery dates. All Next Day Delivery Orders
are targeted to be posted on the same day if received before 12.00pm between
Monday to Friday, excluding holidays and weekends. On occasions where we are
short of stock, the order will be processed and sent next working day. If the
Next Day Delivery orders are dispatched after a 2nd day, we
will refund you the excess postage price difference (listed in the product
listing). We will not be held responsible if the courier company delays the
delivery of parcels or if they are not delivering on time matching what we have
mentioned in our listings. These are the average estimated time where 97% of
the parcels are delivered on time by the courier companies.
Return Policy : Our aim is to keep all our customers satisfied. If for any reason you are not happy with the product or if it does not fit/operate due to your car’s make and model or the smaller number plate area space, we offer a full refund upon receipt of the returned goods. . All lost/damaged parcels during transportation will be refunded in full or a product replacement will be sent upon receipt of goods, if requested by customer. We may charge for the postage and packaging cost for returned goods if they are not faulty or damaged during transit. This applies for 30 days after purchase. If you are not happy with any of our products or services, please contact us first to let us know if we are able to resolve the issue. Our aim is to give you a good service and experience.
*************************************************************
DYNX Limited is a
registered UK based company, All our products are dispatched form the UK
warehouse, we are dedicated to support and after sales service, Buy
with confidence. Bringing to you the best quality products at amazing
prices, with the money back guarantee…
*************************************************************
All rights reserved, Any
unauthorized publishing, design copying or re-making will constitute an
infringement of copyright, Commercial copying is prohibited. This fact sheet is
Copyright © The UK Copyright Service and protected under UK and international
law. The use of this fact sheet is covered by the conditions of a Dynx Limited.
This fact sheet is intended only as an introduction to ideas and guidance only.
It should not be treated as a definitive guide, nor should it be considered to
cover every area of concern, or be regarded as legal advice.