PACKAGE CONTENT:( NOT include Raspberry Pi board.)
7.3inch e-Paper (F) x1
Driver Board and FFC cable x1
PH2.0 20cm 8Pin x1
RPi screws pack (2pcs) x1
Wiki English manual :www.waveshare.com/wiki/7.3inch_e-Paper_HAT_(F)
Low Power, Wide Viewing Angle, Paper-Like Effect Without Electricity
Ideal for price tags, shelf labels, industrial instruments...
Size7.3″
Resolution800×480
Viewing Angle>170°
Display Color7-color
Grey Scale2
CommunicationSPI
Display PanelE-paper
ExperiencePaper-like
EnvironmentAmbient Light Required
Display TypePassively Reflective
Advanced Color ePaper (ACeP) technology, supports 7-Color display
No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
SPI interface, for connecting with controller boards like Raspberry Pi/Jetson Nano/Arduino/STM32, etc.
Onboard voltage translator, compatible with 3.3V/5V MCUs
Wiki English manual(driver board schematic, examples for Raspberry Pi/Arduino/STM32)
OPERATING VOLTAGE | 3.3V/5V | DISPLAY COLOR | 7-Color |
INTERFACE | 3-wire SPI, 4-wire SPI | GREY SCALE | 2 |
OUTLINE DIMENSIONS | 170.2 × 111.2mm | FULL REFRESH TIME | 35s |
DISPLAY SIZE | 160 × 96mm | REFRESH POWER | <49.4mW (typ.) |
DOT PITCH | 0.2 × 0.2 mm | STANDBY CURRENT | <0.01uA (almost none) |
RESOLUTION | 800×480 pixels | VIEWING ANGLE | >170° |
Compatible With Raspberry Pi Series Boards, Jetson Nano
For Use With Controller Boards Like Raspberry Pi/Jetson Nano/Arduino/STM32
VCC | Power (3.3V / 5V input) |
GND | Ground |
DIN | SPI MOSI pin |
SCLK | SPI SCK pin |
CS | SPI chip selection, low active |
DC | Data/Command selection (high for data, low for command) |
RST | External reset, low active |
BUSY | Busy status output pin |
Suitable For Price Tags, Asset/Equipment Tags, Shelf Labels, Conference Name Tags...