UNDERWATER FISHING HARPOON RUBBER RAPID RUBBER S45 FUSIL 115-120 70cm

Exclusive Cressi rubbers made and assembled 100% in Spain | Outside diameter Ø18 mm and inside Ø2.5 mm | shore hardness 42 | black color | Pure latex from Malaysia without any type of "filler" or mixture of impurities in its composition | Naturally vulcanized without process acceleration, for maximum elastic action | Maximum rod accompaniment and moderate load difficulty | Bushings made from Delrin for superior strength and ease of threading | Lengths between 50 and 70 cm depending on the size of the rifle.

Presentation in fast rubber of the S45 model for use in rifles with an open head or as a second rubber.
Exclusive Cressi rubbers made and assembled 100% in Spain. They have been carefully studied for use in high-level fishing and in competition. Its composition, level of hardness and thickness are the result of countless tests on different prototypes and the final product meets the requirements of elite fishermen, in all types of spear s with any type of rod.
Its spectacular power is due, on the one hand, to the hardness of its composition (shore 42 against usual levels of 38 to 40) and its diameter of 18 mm against the 16 mm/15 mm of normal rubbers. Its composition, diameter and the small diameter of the longitudinal cannula provide it with great resistance to pressure, which also makes it ideal for deep-sea fishing.
The bushings have been manufactured in DELRIN for superior strength and ease of threading.
Latex: pure latex from Malaysia without any type of filler or mixture of impurities in its composition, it only has the dye additive that transforms it into opaque black (only one gram dyes 5 K of latex). No filler is added to its composition so as not to harm the natural characteristics of latex recovery speed and elasticity. The latex, once coagulated, dries naturally (outdoors) for a minimum of 40 days.
Their pure composition makes them have an outstanding elasticity that translates into a homogeneous accompaniment of the shaft, thus increasing the range of the shot and the inertia and penetration capacity of the same, with a reduced load difficulty compared to other rubbers of lower performance. Precisely this elasticity allows the easy use of short measures (depending naturally on the tastes and capacity of the fisherman), increasing the thrust path of the rubber on the rod, a factor that places it at a clear advantage over traditional rubbers, especially those of superior quality. diameter.
Extremely resistant to the action of ultraviolet rays, saltpeter and ozone, as well as intensive use for a long time without loss of performance.
Exclusive manufacturing with straight tube: unlike other manufacturers, Cressi latex rubbers are perfectly straight, as they are produced in short strips of one meter in length instead of long rolls that involve lower manufacturing costs but a longitudinal section always curved. Matching: it is a very manual and entertaining process but it has a significant influence on the performance of the tires. The pairs of rubber bands are made taking into account both length and hardness, in such a way that they are as similar as possible to avoid differences in contraction speed during the shot with disastrous consequences for precision. Thus, the difference in hardness in the same pair is a maximum of +- 0.1 mm.
Finishes: always perfect finishes, completely rounded and avoiding the traditional defects that prevent the easy threading of the rubber due to excesses exceeding the diameter of the thread.
Measurements: produced in measurements studied for rifles with 60 cm, 75 cm, 90 cm, 100 cm, 110 cm and 120 cm tubes. Presentation: they are served with screen printing in white latex to identify the article and with vacuum packaging for easier display in the store and isolation from the outside.