Brand:Eletechsup 

Product Name: 433MHz DC 12V 2Ch Wireless Controller Timer Delay Relay Switch Module for EV1527 PT2262 ASK OOK Remote control
Packing list :
1 pcs 6 button transmitter remote ;
3 pcs 2 channel DC5V Receiver relay board ;
(all user guide was provided in this item description , there is no extra manual ) 
 
 
Typical applications:
DC 5V Home lighting system
Garage Door
Elevators
Motor reversing control
Remote control switch
Smart Home / Home Automation
LED lighting
Fluorescent lamp
DC 5 DC Motor,RS360
 
 
Wiring Diagram 1:
DC 5V control circuit,Wiring diagram below. "LOAD" may be LED lights, fans, motors and other DC 5V
 

 

 

Wiring Diagram 2:

DC 1-48V OR AC 85-265V control circuit,Wiring diagram below(Note:If not DC 5V load, need another DC 5V power supply). "LOAD" may be LED lights, fans, motors and other DC AC equipment

 

Technical indicators:

Operating voltage : DC 5V

Operating Current : All relays close,about 15MA; one relay open,about 86MA;two relay open,about 157MA

Operating frequency : 433.92M;

Receiver sensitivity : -108dB;

Work mode : Non-locking (Momentary is defult),Self-locking (Toggle),Inter-locking (Latch), Delay;Each channel independently set the Work mode; 500,000 seconds maximum delay

Size(Including housing) : 75*54*28mm

Learning function (can works with EV1527 and PT2262 remote, can store 16 pcs different code remote );

Max load : 500W;

 

Work mode
 
NO : Relay normally open contact
COM : Relay common contact
NC : Relay normally closed contact
Open : NO connection COM, NC disconnect COM
Close : NO disconnect COM, NC connection COM

Non Lock:
Relay: press one button is ON, loosen your finger on the same button is OFF.

Self-locking:
Relay: press one button for one time is ON, press the same button again is OFF.

Interlock:

Relay: press one button is ON, press another button is OFF.

 

Normally, we would adapter remote control and receiver.
If the item you received has not been adapted Or you need to add accessories, Please follow the instructions below

Learning method and steps:

Under normal operating mode, LED will be lit, when receives a valid remote control (EV1527 / PT2262) button values, LED flashes

Clean code: press the button and held down, LED off, LED will light about 8 seconds later, clean code is completed (Note: After performing clean code previously stored remote control value does not exist)

Step 1 (into the learning mode): Press the button (about 1 second), LED off;

Step 2 (adapter channel 1): Then press the first button on the remote control, LED flashes four times off, then learning the first button value

Step 3 (Adaptation Channel 2): Then press the second button on the remote control, LED flashes four times brighter, then learned two key values

 

Use more details, please click here!

 

Transmitter :
Qty : 1 pcs 6Button Fixed code remote ;
 
 
 
 
 

Features / Specifications :

1. 6 buttons;
2. High stability, SMT chip, frequency stabilization SAW, ultra-high-frequency transistor;
3: Large power;

 

Technical Data :
Transmitter Module No.: TB424;
Power supply : 12V 23A battery (not included ) , please buy battery from here : https://www.ebay.com/sch/i.html?_from=R40&_trksid=p2047675.m570.l1313.TR3.TRC2.A0.H0.X12V+23A+battery.TRS0&_nkw=12V+23A+battery&_sacat=0 .
 
Operating current: 28-33mA;
Oscillation mode: SAW resonator;
Modulation mode:ASK/OOK;
Operating frequency:433.92MHZ ;
Encoding format: EV1527 fixed code ;
Transmit power : 200mW ;
 
Compatiable Spare remote :  https://stores.ebay.com/RF-Wireless-Electronics-Technology/Fixed-Code-Transmitters-/_i.html?_fsub=5534337015&_sid=1103009655&_trksid=p4634.c0.m322 .