With the coming up of new software version V2.62 released on 2022 June 1, Autel MK808S now support “Active test” (BI-Directional Control) on various module actuators for more instant & accurate diagnosis, which is now in the same level as MP808/MP808K/MP808BT, but cost you 300 bucks less.
AutoAuth Access: Bypass SGM in FCA Vehicles
Autel MaxiCOM MK808S allow direct access to the security gateway module on 2017 and later Fiat Chrysler vehicles, so that the diagnostic tool can perform easier full diagnostics, run bi-directional active tests, actuations, relearns, ADAS calibration assistance etc.
Digital Inspection: Work with MV108S
The Digital Inspection application configures the MaxiSys Diagnostics Device to operate as a digital video scope by simply connecting the tablet to a Digital Inspection Camera. This function allows you to examine difficult-to-reach areas normally hidden from sight, with the ability to record digital still images and videos, which offers you an economical solution to inspect machinery, facilities, and infrastructure in a safe and quick way
Special Function : initial adaptation, self-learning or some auto detection function with many procedures that the vehicle is performed after maintenance or reset is done or some related component in electronic control system is replaced, such as Crankshaft Position Sensor Learn
New 7 Added Functions in BMW 4.0 Software:
transport mode, high-voltage battery, cruise calibration, air conditioning learning, rain light sensor, EGR self-learning, and FRM reset; Adds basic functions and special functions for models with 4 types of chassis including G22 and G82.
Autel MK808S auto diagnostic scanner adopts the latest VIN-based Auto VIN Technology that enables auto technicians or home mechanics to identify vehicle information, like brand, year, make, model and etc, at a single touch. As the upgrade Version of Autel MX808, Autel MaxiCOM MK808S can reach more modules and car systems to perform deeper comprehensive diagnose, such as Engine, Transmission, SRS(Airbag), ABS, TPMS, BCM, BODY, A/C, Steering, Suspension, Airbag and etc, retrieve E~CU info, get freeze frame data and graphic & text live data for accurate efficient solution.
Support 4 methods for Vehicle Identification:
Autel Scanner MK808S 2024 version is the upgrade version of Maxicheck MX808, able to perform up to 28 maintenance services, include but not limited to
ABS Auto Bleed, Oil Reset, SAS Adjustment; DPF Caliberation, Throttle Relearn; Injector Coding, DPF Regeneration, service mileage reset, EPB Reset & ect.
Note: The above mentioned is just a small portion of all supported services and more are not listed.
Note: Please also know that Not All service & Special functions are universally compatible. Please send VIN number and the functions you need to us to check compatibility.
Autel MK808S enables technicians and home mechanics to bleed air out of the ABS module and saves you time and money paying a visit to dealership.
When an injector is repaired, its operating characteristics change significantly. Therefore, it is very important to assign a new code C2i or C3i to the injector to properly reflect the performance of the repaired injector. Autel MK808S is able to do the job for your car.
Whenever there is an oil change, you have to reset the engine oil system. This is because the engine oil life system is responsible for calculating when engine oil and filter should be changed. In that case, Autel MK808S diagnostic tool can help you fix oil service light quickly.
If the Emergency release cable has been activated, Autel MK808S allows the EPB to be un-jammed when the vehicle has entered a state where the brakes screech when applying the Parking Brake, the rear brakes squeak or rub when the vehicle is moving or there is evidence of shoe-drag.
Wide Vehicle Coverage:
Autel OBD2 Scanner MK808S has unmatched vehicle coverage, able to supports various protocols such as ISO9141-2, ISO14230-2, ISO15765 ,K/L-Line, Flashing Code, SAE-J1850 VPW, SAE-J1850PWM, ISO 11898 (Highspeed, Middlespeed, Lowspeed and Singlewire CAN, fault-tolerant CAN), SAE J2610, GM UART UART Echo Byte Protocol, Honda Diag-H Protocol, TP2.0, TP1.6..
Autel MK808S diagnostic tool can work on 85+ American, European and Asian car makes and over 10000+ car models and can support some of the 2023 latest car models. For example, MK808S can support Ford F-150 2023, Ford F-650 2023, Ford F-750 2023, Dodge D2-Ram 3500 Pickup 2023,
Dodge DD-Ram 3500 Cab Chassis 2023, Dodge DF-Ram 3500 Cab Chassis 10K 2023, Dodge DJ-Ram 2500 2023, Dodge DP-Ram 4500 2023, Dodge DP-Ram 5500 2023, Dodge DS-Ram 1500 2023, Dodge DT-Ram 1500 and a lot more.
Note: Autel MK808S can not work on heavy trucks.
About The Languages:
Autel MK808S is designed to service global users with different language background and this is reason why it offer various language options. The default language of this device is English. It can now support up to 13 languages: English, Spanish, French, German, Russian, Italian, Portuguese, Japanese, Korean, Chinese, Swedish, Dutch & Polish.
Note: If you need to switch to a different language, please come to us wuth device S/N (12 digits, at the back of the device, eg: VB7GL6C0576)
Specifications:
Operating System | Android 11 |
Processor | Cortex-A55 quad-core processor (1.8GHz) |
Memory | 4GB RAM & 64GB On-board Memory |
Display | 7-inch LCD capacitive touchscreen with 1024x600 resolution |
Connectivity | Wi-Fi(802.11a/b/g/n/ac) |
USB 2.0,Mini USB 2.0 | |
SD Card (Support up to 64GB) | |
Sensors | Light sensor for brightness auto adjust |
Audio Input/Output | Input: N/A |
Output: Beep | |
Power and Battery | 3.7 V/5000mAh lithium-polymer battery |
Charges via 5 VDC power supply | |
Input Voltage | 5 V/1.5 A |
Operating Temp | 0 to 50°C (32 to 122°F) |
Storage Temp | -20 to 60°C (-4 to 140°F) |
Dimensions(WXHX D) | 270.8 mm (10.0”) x 176.0 mm(6.9”) x 36.0 mm (1.4”) |
Weight | 885 g (2.31 lb.) |
Protocols | ISO9141-2, ISO14230-2, ISO15765, K/L-Line, Flashing Code, SAE-J1850 VPW, SAE-J1850PWM, ISo11898(Highspeed, Middlespeed, Lowspeed and Singlewire CAN, fault-tolerant CAN) SAE J2610, GM UART UART Echo Byte Protocol, Honda Diag-H Protocol,TP2.0,TP1.6 |