RPM Axle Carriers w/Bearings For Traxxas Revo E-Revo T-Maxx 3.3 E-Maxx Slayer
Do not use the Traxxas #5356 Long Travel Rocker Arm Set with these Axle Carriers. Doing so will void the RPM warranty. This is a set of RPM Axle Carriers/Steering Blocks in Blue for the Traxxas Revo 2.5, 3.3, E-Revo, Slayer, T-Maxx 2.5R, 3.3, and E-Maxx 16.8V, and E-Maxx Brushless trucks. Oversized bearings are included. These come with the RPM lifetime limited warranty. FEATURES: Constructed of molded composite material, blue in color Wall thickness around the pillow-balls has been increased by 40% eliminating split walls Over 20% more material supports the pillow-balls, preventing them from pulling through Redesigned reinforcing rib supporting tie rod mount Redesigned boot lock tabs for easier removal of the silicone boots Press-fit bearings in the carrier for reduced axle movement Two-piece pillow-ball set screws use aluminum and Delrin for the ultimate in holding power under extreme situations INCLUDES:Two Axle Carriers/Steering BlocksTwo 12x21x5mm Inner BearingsTwo 6x15x5mm Outer BearingsFour Aluminum Set ScrewsFour Delrin Bushing CapsInstruction Sheet REQUIRES:Installing on axles, no modifications required
Do not use the Traxxas #5356 Long Travel Rocker Arm Set with these Axle Carriers. Doing so will void the RPM warranty.
This is a set of RPM Axle Carriers/Steering Blocks in Blue for the Traxxas Revo 2.5, 3.3, E-Revo, Slayer, T-Maxx 2.5R, 3.3, and E-Maxx 16.8V, and E-Maxx Brushless trucks. Oversized bearings are included. These come with the RPM lifetime limited warranty.
FEATURES:
-
Constructed of molded composite material, blue in color
-
Wall thickness around the pillow-balls has been increased by 40% eliminating split walls
-
Over 20% more material supports the pillow-balls, preventing them from pulling through
-
Redesigned reinforcing rib supporting tie rod mount
-
Redesigned boot lock tabs for easier removal of the silicone boots
-
Press-fit bearings in the carrier for reduced axle movement
-
Two-piece pillow-ball set screws use aluminum and Delrin for the ultimate in holding power under extreme situations
INCLUDES:
Two Axle Carriers/Steering Blocks
Two 12x21x5mm Inner Bearings
Two 6x15x5mm Outer Bearings
Four Aluminum Set Screws
Four Delrin Bushing Caps
Instruction Sheet
REQUIRES:
Installing on axles, no modifications required
