4 in / 100 mm Extractor Fans for Bathroom / Kitchen / Toilet
⚠️ WARNING ⚠️
We require that you use a registered electrician to do any electrical work in or around your home.
If you use a registered electrician, you can expect to have safe electrical installation work done, as the work should meet the UK national standard, BS 7671 (Requirements for Electrical Installations).
Otherwise, the warranty will be void.
The humidity sensor detects moisture in the range of 40% to 90% relative humidity. The fan – depending on the connection solution to the network – can be launched automatically or manually. AUTOMATIC START: the device switches on when the air humidity level exceeds the value set on the H-potentiometer and it switches off after passage of time (defined on the T-potentiometer) counted from the moment of humidity level decrease.
MANUAL START: the fan is activated by the switch being part of the building’s electrical system (not included in the device) or a separate switch intended for fan. After turning off the switch, the device (as in the first case) switches off after the time specified on the T-potentiometer, if the moisture level in the room is below the level set on the H-potentiometer. The moisture detection system is the master system.
The ventilation fan body is offered in size Ø 4 in / 100 mm in TURBO and SILENT version.
TURBO version is characteristic for higher air replacement efficiency level, whereas SILENT version stands out thanks its particularly low noise level (even 26 dB) and very low power consumption while offering sufficient efficiency.
Specification:
Power supply voltage: 230 V - 240 V / 50 HZ
IP Code: IPX 4
100 mm Silent Model:
Consumption: 5 W
Max Flow Rate: 75 m3 / h
Max Noise Level: 26 Db
100 mm Turbo Model:
Consumption: 13 W
Max Flow Rate: 110 m3 / h
Max Noise Level: 36 Db
Front Panels
By combining decorative appeal with utility features extractor fans panels are a
stylish choice for interior design.