120M DSO2512G Portable Dual Channel Handheld Oscilloscope With High Bandwidth
Constant Current Electronic Load Battery Discharge Capacity Tester 150W 200V 20A
Specification:
Brand new
Size: approx. 156*96*58mm
Input Interface/Output Interface: 100A large current occluding screw column
Voltage Testing Range: 0.00V~200V; Resolution Accuracy: 0.01V
Current Testing Range: 0.00A~20A; Resolution Accuracy: 0.01A
Capacity Accumulated Range: 0~999.999Ah; Resolution Accuracy: 0.01Ah
Electricity Accumulated Range: 0~9999.9Wh; Resolution Accuracy: 0.01Wh
Power Measurement Range: 0000.00~150/180W; Resolution Accuracy: 0.01W
Impedance Measurement Range: 1~999.9 ohm; Resolution Accuracy: 0.01ohm
Temperature Measurement Range: 0~99℃; Resolution Accuracy: 1℃
Timing the max time: 999 hours 59minutes 59 seconds; Resolution Accuracy: 1s
Timing Testing Alarm Setting: count down 24 hours Arbitrary setting value
Small current standby alarm threshold parameter and timing: <2W/0.5 hour; >0.5W begin timing
4~30V DC voltage provides electricity for testing system
Refresh Time: >500mS/times; > 500mS/times
Testing Speed Rate: about 0.5 times/s
Over voltage over current setting alarm method:display warming interface alrm users
Over Voltage Warning Setting Range: 1~200V
Low Voltage Warning Setting Range: 0~190V
Over Current Warming Setting Range: 0.2~100A
Display Screen Type: micro power consumption crystal module LCM black font green backlight Chinese English display screen
Working Temperature: -10~+60℃; -10~+60℃
Working Humidity: 10~80% (no condensation);10~80& (no doubt)
Working Gas Pressure: 80~106kPa
Feature:
Can be taken as electronic constant current load, USB tester, cable detector.
8 in 1 measurement: voltage, current, power, battery capacity, impedance, temperature, energy, time, external waterproof temperature probe.
Built-in intelligent temperature control and large power auto protection,safe discharger.
Test charger function voltage and maximum current.
Universal test all kinds of batteries, all kinds of power supply, all kinds of charger.
Fine workmanship and good performance.
Easy to use.
Long service life.
Operation Method:
Keystrokes using method and the capacity, power, time reset Settings:
1. Reset button long-press all data (mAh, Wh, 00:00:00)
2. Quickly button twice - capacity Reset (mAh)
3. Quickly button three - power reset (Wh)
4. Quickly button four - time reset (00:00:00)
5. Quickly button five - Set up automatic standby and Discharge the countdown to remind regularly
6. When no load output no-load, quick seven keys, and for the current zero to zero in the current environment temperature for accurate calibration, so more can do more accurate measurement in small current.
Package included:
3 x 150W USB Mobile Power Tester
3 x Charger
3 x Crocodile Clamp Cable
3 x Crocodile Clip to USB Male Head
