Launch X431 GIII X-PROG 3 Advanced Immobilizer & Key Prog-rammer XPROG 3 Chip Reader

X-PROG 3 advanced immobilizer & key Prog-rammer is a powerful chip reading device that can read/write keys to the vehicle. Compatible with X-431 series diagnostic scanners, X-PROG 3 enables Anti-theft type identification, Remote control matching, Key chip reading & matching, anti-theft password reading and anti-theft component replacement.



Highlights:

1. All-in-One Key Prog-rammer. Integrates Multiple Function Models
2. Reads & Writes Most Engine/ Gearbox E-C-Us Without Disassembling the Shell
3. Compatible with Multiple X-431 Series Diagnostic Tablet: X-431 V, X-431 V+, X-431 PAD V, X-431 PAD VII, X431 PRO 5, X431 PROS V4.0, etc
4. Supports V-W/ AUDI MQB Platform Engine E-C-U Replacement or Cloning (Read engine E-C-U data directly from the key).
5. Works with ReProg-ramming Device to Backup/ Restore Prog-ramming Data (For Bosch/Siemens engine E-C-U).
6. Enables Reading/ Writing EEPROM, On-Board MCU and For BMW CAS4+/ FEM Chips, Mercedes-Benz Infrared Keys, Generating Special Keys, Reading for BMW Engine ISN Code.



Launch GIII X-Prog 3 Features:

1. Compatible with X-431 series diagnostic scanners, X-PROG 3 enables reading/ writing EEPROM, on-board M-CU and for BMW CAS4+/FEM chips, Mercedes-Benz infrared keys, generating special keys, reading for BMW engine ISN code.
2. Supported brands: Fit For V-.W, for AUDI, for SKODA, for SEAT, for BMW, for MERCEDES-BENZ, for TOYOTA, etc. More models continue to be updated.
3. Supported systems: Automatic Transmission, Instrument System, CAS, Body System, L.-ock System, etc.
4. Compatible with: X431 V, X431 V+, X431 ProS, X431 PRO GT, X431 PRO V4.0, X431 PRO 3 V4.0, X-431 PRO 5, X-431 PAD III V2.0, X-431 PAD V, X-431 PAD VII
5. Reads & writes most Engine/ Gearbox E-C-Us without disassembling the shell



Update Note:
Launch X431 GIII X-Prog 3 latest update for RESET PROG (V10.05) Function:

1) Added E-C-U reading and writing functions for 10 models of Siemens Engine including MSD80, MSD81, MSD85, MSD87, MSV90, SIM271DE, SIM271KE, SIMOS8.4, SIMOS8.5 and SIMOS8.6;
2) Added E-C-U reading and writing functions for 5 models of Transmission including 9G_Tronic, DQ380, AL551, AL450 and 8HPXX.

Launch GIII X-Prog 3 Advantages:

1. Supports V-.W/AUDI MQB platform engine E-C-U replacement or cloning (Read engine E-C-U data directly from the key).
2. Supports V-.W/AUDI MQB platform gearbox E-C-U replacement or cloning.
3. Supports E-C.U replacement for the fifth-generation of Audi (0AW/0B5) gearbox.
4. Supports reading, writing & cloning the E-C-U for the fourth-generation of V-W UDS engine.
5. Supports for BMW E chassis 8HP gearbox E-C-U reProg-ramming to empty.
6. Works with reProg-ramming device to backup/restore Prog-ramming data (For Bosch/Siemens engine E-C-U).



Supported Brands

Fit For V-W, For Audi, For Skoda, For SEAT, For BMW, For Mercedes-Benz, For Toyota… (updates to be continue)

Supported Systems

Engine system, automatic transmission, instrument system, CAS, body system, l-ock system…

Compatible With 

X-431 PRO GT, X-431 PRO V4.0, X-431 PRO 3 V4.0, X-431 PRO 5, X-431 PAD III V2.0, X-431 PAD V, X-431 PAD VII



Core Functions

1. Integrated the functions of key matching/ copy, anti-theft IC reading & writing, and E-C-U reading & writing, etc.
2. Supports common E-C-U/ MCU/ EEPROM major manufacturers, with over 1200 product models, and constantly updating.
3. Supports E-C-U replacement for all lost without disassembly for V-W/AUDI non-35XX instrument (it can be read directly through independent harness without removing the IC).
4. Supports E-C-U replacement for the fourth-generation of V-W/ AUDI engine;
5. Supports E-C-U replacement for the fifth-generation of V-W/ AUDI Bosch and Siemens engines.
6. Supports the all lost and replacement for the fourth generation of AUDI EZS, comfortable E-C-U, and KESSY IC.
7. Supports the BMW F and G chassis 8HP gearbox E-C-U reProg-ramming to empty.
8. Supports the BMW CAS4/CAS4+ module replacement.
9. Supports the E-C-U cloning and replacement for BMW Siemens engines.
10. Erase the password for Mercedes-Benz engine and gearbox within 3S.
11. Add the function of calculating the password for the Mercedes-Benz key within 1 minute.
12. Supports V-W/ AUDI MQB platform engine E-C-U replacement or cloning (Read engine E-C-U data directly from the key).
13. Supports E-C-U replacement for the fifth-generation of Audi (0AW/0B5) gearbox.
14. Supports reading, writing & cloning the E-C-U for the fourth-generation of V-W UDS engine.
15. Supports BMW E chassis 8HP gearbox E-C-U reProg-ramming to empty.
16. Works with reProg-ramming device to backup/ restore Prog-ramming data (For Bosch/ Siemens engine E-C-U).



Supported E-C-U MCU List: 
(Support more than 1000 models, keep updating)
 

Support EEPROM List:
support more than 1000 models, keep updating
 

How to Use X-PROG3 to Read and Write Data?

Method 1: Directly connect to OBD16 for key matching, data reading and writing, etc

Method 2: Place the anti-theft EEPROM or MCU chip in the chip burning socket, and then insert the chip burning socket into the slot of the immobilizer Prog-rammer l-ocker and l-ock it to realize the data interaction between the IC anti-theft chip and the diagnostic host

Method 3: After removing the E-C-U from the car, connect the anti-theft E-C-U pin to the DIY slot of the immobilizer Prog-rammer through the cable to realize the data interaction between the anti-theft E-C-U and the diagnostic host.



Launch X-Prog vs X-Prog 3
 

Specification:
 

Package List:

1pc x Launch X-PROG 3
1pc x Power adaptor
1pc x Main diagnostic cable
1pc x The fourth-generation data acquisition cable
1pc x The fourth-generation of EEPROM data acquisition cable(without dismantling dashboard)
1pc x BE-NCH mode cable
1pc x M-CU converter V1
1pc x M-CU converter V2
1pc x M-CU cable with multiple leads
1pc x EEPROM chip adaptor
1pc x for Benz infrared analog acquisition key
1pc x M-CU cable with multiple leads
1pc x EEPROM converter
1pc x User Manual