WARNING:

• Be sure the electricity to the wires you are working on is shut off; either the fuse is removed or the circuit breaker is turned off. Turning the power off using the light switch is not sufficient to prevent electrical shock.
• Do NOT install or use the light fixture if any part is missing or damaged. Contact your dealer for replacement or missing parts.
• For use with ceiling mounted track only.

IMPORTANT SAFETY INSTUCTIONS:

• Read all instructions.
• Do NOT install this track system in damp or wet locations.
• Do NOT install any part of a track system less than 5 feet above the floor.
• Do NOT install any luminaire assembly closer than 6 inches from any curtain, or similar combustible material.
• Disconnect electrical power before adding to or changing the configuration of the track system.
• Do NOT attempt to energize anything other than lighting track luminaires on the track. To reduce the risk of fire and electric shock, do
  NOT attempt to connect power tools, extension cords, appliances, and the like to the track.
• Do NOT connect a track to more than one branch circuit unless the track is constructed so that it can be used with more than one branch
  circuit. Check with a qualified electrician. Although the track lighting system may seem to operate acceptably, a dangerous overload of
  the neutral may occur and result in a risk of fire.

CAUTION:

• HOT SURFACE! The track luminaire is hot when the power is on, wait at least 5min to touch it after the power is off.