This item located in Czech Republic and only shipped to European countries,
If you need to return the item for some reasons, please contact us via eBay message firstly to get the RMA#,and return address instead of sending iit back directly without permission,thank you!
Launch X431 GIII X-PROG 3 Advanced Immobilizer & Key Prog-rammer XPROG 3 Chip Reader
X-PROG 3 advanced immobilizer & key Prog-rammer is a powerful chip reading device that can read/write keys to the vehicle. Compatible with X-431 series diagnostic scanners, X-PROG 3 enables Anti-theft type identification, Remote control matching, Key chip reading & matching, anti-theft password reading and anti-theft component replacement.
Highlights:
1. All-in-One Key Prog-rammer. Integrates Multiple Function Models
2. Reads & Writes Most Engine/ Gearbox E-C-Us Without Disassembling the Shell
3. Compatible with Multiple X-431 Series Diagnostic Tablet: X-431 V, X-431 V+, X-431 PAD V, X-431 PAD VII, X431 PRO 5, X431 PROS V4.0, etc
4. Supports V-W/ AUDI MQB Platform Engine E-C-U Replacement or Cloning (Read engine E-C-U data directly from the key).
5. Works with ReProg-ramming Device to Backup/ Restore Prog-ramming Data (For Bosch/Siemens engine E-C-U).
6. Enables Reading/ Writing EEPROM, On-Board MCU and For BMW CAS4+/ FEM Chips, Mercedes-Benz Infrared Keys, Generating Special Keys, Reading for BMW Engine ISN Code.
Launch GIII X-Prog 3 Features:
1. Compatible with X-431 series diagnostic scanners, X-PROG 3 enables reading/ writing EEPROM, on-board M-CU and for BMW CAS4+/FEM chips, Mercedes-Benz infrared keys, generating special keys, reading for BMW engine ISN code.
2. Supported brands: Fit For V-.W, for AUDI, for SKODA, for SEAT, for BMW, for MERCEDES-BENZ, for TOYOTA, etc. More models continue to be updated.
3. Supported systems: Automatic Transmission, Instrument System, CAS, Body System, L.-ock System, etc.
4. Compatible with: X431 V, X431 V+, X431 ProS, X431 PRO GT, X431 PRO V4.0, X431 PRO 3 V4.0, X-431 PRO 5, X-431 PAD III V2.0, X-431 PAD V, X-431 PAD VII
5. Reads & writes most Engine/ Gearbox E-C-Us without disassembling the shell
Update Note:
Launch X431 GIII X-Prog 3 latest update for RESET PROG (V10.05) Function:
1) Added E-C-U reading and writing functions for 10 models of Siemens Engine including MSD80, MSD81, MSD85, MSD87, MSV90, SIM271DE, SIM271KE, SIMOS8.4, SIMOS8.5 and SIMOS8.6;
2) Added E-C-U reading and writing functions for 5 models of Transmission including 9G_Tronic, DQ380, AL551, AL450 and 8HPXX.
Launch GIII X-Prog 3 Advantages:
1. Supports V-.W/AUDI MQB platform engine E-C-U replacement or cloning (Read engine E-C-U data directly from the key).
2. Supports V-.W/AUDI MQB platform gearbox E-C-U replacement or cloning.
3. Supports E-C.U replacement for the fifth-generation of Audi (0AW/0B5) gearbox.
4. Supports reading, writing & cloning the E-C-U for the fourth-generation of V-W UDS engine.
5. Supports for BMW E chassis 8HP gearbox E-C-U reProg-ramming to empty.
6. Works with reProg-ramming device to backup/restore Prog-ramming data (For Bosch/Siemens engine E-C-U).
Supported Brands
Fit For V-W, For Audi, For Skoda, For SEAT, For BMW, For Mercedes-Benz, For Toyota… (updates to be continue)
Supported Systems
Engine system, automatic transmission, instrument system, CAS, body system, l-ock system…
Compatible With
X-431 PRO GT, X-431 PRO V4.0, X-431 PRO 3 V4.0, X-431 PRO 5, X-431 PAD III V2.0, X-431 PAD V, X-431 PAD VII
Core Functions
1. Integrated the functions of key matching/ copy, anti-theft IC reading & writing, and E-C-U reading & writing, etc.
2. Supports common E-C-U/ MCU/ EEPROM major manufacturers, with over 1200 product models, and constantly updating.
3. Supports E-C-U replacement for all lost without disassembly for V-W/AUDI non-35XX instrument (it can be read directly through independent harness without removing the IC).
4. Supports E-C-U replacement for the fourth-generation of V-W/ AUDI engine;
5. Supports E-C-U replacement for the fifth-generation of V-W/ AUDI Bosch and Siemens engines.
6. Supports the all lost and replacement for the fourth generation of AUDI EZS, comfortable E-C-U, and KESSY IC.
7. Supports the BMW F and G chassis 8HP gearbox E-C-U reProg-ramming to empty.
8. Supports the BMW CAS4/CAS4+ module replacement.
9. Supports the E-C-U cloning and replacement for BMW Siemens engines.
10. Erase the password for Mercedes-Benz engine and gearbox within 3S.
11. Add the function of calculating the password for the Mercedes-Benz key within 1 minute.
12. Supports V-W/ AUDI MQB platform engine E-C-U replacement or cloning (Read engine E-C-U data directly from the key).
13. Supports E-C-U replacement for the fifth-generation of Audi (0AW/0B5) gearbox.
14. Supports reading, writing & cloning the E-C-U for the fourth-generation of V-W UDS engine.
15. Supports BMW E chassis 8HP gearbox E-C-U reProg-ramming to empty.
16. Works with reProg-ramming device to backup/ restore Prog-ramming data (For Bosch/ Siemens engine E-C-U).
Supported E-C-U MCU List:
(Support more than 1000 models, keep updating)
For Atmel | For NSC |
For Fujitsu | For Philips |
For Infineon | For Renesas M16 |
For MC68HC05 | For Renesas M32 |
For MC68HC08 | For Renesas M32R |
For MC68HC11 | For Renesas R32C |
For MC68HC12 | For Renesas R8C |
For MediaTek | For Renesas V850 SPI |
For MicroChip | For Renesas V850 UART |
For Nordic | For Samsung |
For ST | For SiLabs |
Support EEPROM List:
support more than 1000 models, keep updating
4Wire | GI | Numonyx | SST |
Adesto | GigaDevice | OKI | ST |
AKM | Grundig | ON Semi | Toshiba |
Altera | HOLTEK | Other | Winbond |
Amic | Hynix | PCT | Xicor |
Atmel | I2C | Philips | xUSSR |
B-OSCH | ITT | Pioneer | YMC |
Catalyst | KHIC | PMC | Spansion |
Chingis | Macronix | Ramtron | SPI |
Dallas/Maxim | MicroChip | Rohm | NEC |
EON | Micron | Samsung | NSC |
ESMT | MicroWire | Seiko | Ford |
EXEL | Mitsubishi | Siemens | Fujitsu |
Fairchild | Motorola | Sony |
How to Use X-PROG3 to Read and Write Data?
Method 1: Directly connect to OBD16 for key matching, data reading and writing, etc
Method 2: Place the anti-theft EEPROM or MCU chip in the chip burning socket, and then insert the chip burning socket into the slot of the immobilizer Prog-rammer l-ocker and l-ock it to realize the data interaction between the IC anti-theft chip and the diagnostic host
Method 3: After removing the E-C-U from the car, connect the anti-theft E-C-U pin to the DIY slot of the immobilizer Prog-rammer through the cable to realize the data interaction between the anti-theft E-C-U and the diagnostic host.
Launch X-Prog vs X-Prog 3
Item Name | X-prog | X-Prog 3 |
EEPROM Read and Write | × | √ |
MCU Read and Write | × | √ |
Mercedes Benz Key | × | √ |
Key Simulator | × | √ |
for V-.W 4th instrument disassembly/reading/all lost | × | √ |
Read Engine via Bench Mode | × | √ |
Read Engine via Boot Mode | × | √ |
for V-.W 4th All Key Lost without Account | × | √ |
Read Gearbox | × | √ |
Read and Write Key | √ | √ |
Read for BMW ISN | × | √ |
Read CAS4+/FEM Chip | × | √ |
for Audi 5th generation steering column chip reading and writing | × | √ |
Replace OBD Reading Component | √ | √ |
Specification:
Interface | DB26, DB15 |
Input Power | DC12V |
Working CurrentMax | 500mA |
Power Consumption | 5W |
Storage Temperature | -20℃~70℃ |
Working Temperature | 0℃~50℃ |
Package List:
1pc x Launch X-PROG 3
1pc x Power adaptor
1pc x Main diagnostic cable
1pc x The fourth-generation of EEPROM data acquisition cable(without dismantling dashboard)
1pc x BE-NCH mode cable
1pc x M-CU converter V1
1pc x M-CU converter V2
1pc x M-CU cable with multiple leads
1pc x EEPROM chip adaptor
1pc x for Benz infrared analog acquisition key
1pc x M-CU cable with multiple leads
1pc x EEPROM converter
1pc x User Manual