TV Led Lights USB TV Backlight Strip 5050 RGB Lighting Strips + Remote Control

               

FEATURES

Create special atmosphere from behind your TV or any screens and walls

Low voltage operating, no flickering and no noise

16 colors display, 4 modes, with a three buttons controller

USB connection, more convenient for installing

Driven by device with output 5V USB port,like your HDTV/computer/ Desktop / laptop /Tablet


Intallation Procedures:

1.Make sure the power is off before installation.

2.Make sure the paste surface is clean and dry.

3.Make sure the length of paste surface and cut off the LED strip if neccessary.

4.Take off the tape cover and Paste LED strip.

5.Plug USB connector and turn on the power.


SPECIFICS

Input voltage: DC 5V

Rated power: 6 W

LED type: 5050 SMD

Strip length: 1m/2m

Beam angle: 120 degree

Lifespan: 50,000 hours

Power method: USB powered

LED density: 60LEDs

Color: RGB changing 16 colors

Mode & Pattern:Pattern: Static/Flash/Strobe/Fade-change/RGB Smooth-change

 

Package Includes:

1 X LED Light Strip.

1 X USB Connector.

1 X 24 Key RGB Controller


What position? Please try again

0.Unplug all hardware
1. Plug in the LED Strip Lights
2. Point remote to receiver and Press OFF
3. Select Blue. The lights should turn blue and you can select another color. 

Once you plug everything in, please point remote to receiver and select off. You can then select the color that you want. You can also flip the pins where the led strip and receiver connects to see if it has a better connection. Can you give it a try?


Note:
There is an insulating protective film on the battery

You need to remove the insulation sheet on the remote control battery.

Please check the battery and make sure all plastics underneath are removed. 

 

PushAuction