https://youtu.be/B3M8Xn-FXiA?si=PkROKD0h7Hn2N-Hi

 !   Mr. Michael Lovett (a friend & the partner of Bob Loveless) wrote me his response under this video:

Mr. Levitt

Now that I've had a chance to really try these stones, I'm very impressed! I have a lot of diamond stones here. Simple plated stones, Venev Diamond Stones that are an nonmetallic binder along with Jande and Columbia Gorge. Nothing, and I mean nothing cuts like these stones.  Fast, but the finish they leave on the blade is crisp like I've never seen before. Even the coarser grits such as the 550 and 650 grits shave well, smooth in paper slicing but have an aggressive nature that has to be felt to believe. So aggressive in fact that care must be taken around the edges. Not for the careless user! 

I will be ordering more of these stones. The ones shown here are for fixed angle sharpeners, but I do need to pick up a couple of bench stones. It's on the too do list! 

I can't thank you enough for pepping these stones for me. I already have many hours using them on from D-2, 154-cpm, to M-4 and S90V. These stones are like the Honey Badger. They don't care! Nothing is too tough for the. :<)

KnifeMaker/Mike/Retired after over 47+ years in the Craft.  !  :

 !  Mr. MICHAIL LOVETT from the TAXES (USA) - See the pictures: subhilt9 (141) US $ 64.04  ! 

    Wonderful Company in a very unique and innovative industry. The workmanship is outstanding and world leading in their field. I look forward to seeing more of their offerings in Industry here in the U.S. Customer communication is fast and courteous and they are willing to answer questions personally. Rare in today's World. I will be extensively testing their offerings for Knife Makers, Collectors, and users. KnifeMaker/Medically retired after over 47+ years in the Shop.

• 40/28μ (F 550) 17mm: CBN-stone Apex Edge Pro, Ganzo Ruixin Pro, TSPROF Hapstone (# 395199454211)

   !  Mr. MICHAIL LOVETT from the TAXES (USA) - See the pictures: subhilt9 (141) US $ 64.04  ! 

We Are Selling the Original PDTools Product in North America: 

(Guys, Beware of Scammers! https://www.youtube.com/watch?v=r63OK8DQyCg, https://youtu.be/qtsX5jxz6g8. - Example. Not for selling. The actual product sees on the pictures on eBay. This knife was sharpening by PDTools CBN-stone (video from some our buyer) - https://www.youtube.com/shorts/DtGegwq2hNw.) 

Because Of We Are the Official Dealer of the PDT-Factory, Ukraine in North America (See Attached Photos).

From the previous Buyer from the USA: bobilliam (41) US $ 340.00

•     Used these stones a couple times so far, very impressed. Very fast cutting with no loading or glazing like resin bonded stones and surprisingly very good feedback when you're off angle. Nothing like a resin bond stone or a electroplated stone. The edge the 20/14 stone leaves after stropping on 14 micron cbn is exactly what I was looking for in my k390/maxamet/etc. Might need to try some higher grits in the future. Highly recommended!

The EXPERT Set / 25mm – CBN sharpen/honing stone Edge Pro Ruixin TSPROF Hapstone (# 354426287733)

Cubic Boron Nitride (CBN) is the Micro powder Super abrasive. 

Knife Knowledge: CBN vs Diamonds - Whetstone built to do the job. Everything you need to know - https://youtu.be/8DD2yQj7K8E - In video CBN - stone bonded by resin and we sell MUCH BETTER - these stones are bonded by a copper-tin metal. ONLY the PDT factory (Ukraine, Poltava) has this technology in the World!  

Stones with grits finer 3 microns either require preparation on cast iron plates, or they will be self-polished after sharpening of 30-50 knives. Then they will be of gold color and work well. 

 

Use and cleaning (unclogging)

Use any comfortable oil (baby, olive..) to prevent glazing. If glazed - clean (unclog) with alcohol and toothbrush.

Maintenance is only needed every year or two to flatten stone or "open up" abrasive grains. In 1-2 years you may need to flatten stone, on the glass with silicon oxide powder or iron oxide - grinding is carried out using powder of the same grit as the will be leveled sharpening stone (!).

   Tips:

Question from:  marbalie-0 (148)

   Are these stones resin bonded or electroplated? Not really seeing specifics.

Answer:

   These stones are bonded by a copper-tin metal. This distinguishes them from Chinese (bonded by electroplated) and from European ones (on a resin bond). That is, cubic nitride boride (CBN) is added to boiling copper-tin lava and it is "baked" in a metal base. This technology is available ONLY at the Poltava Diamond Tools factory (!), which makes the sharpening process with these types of stones the strongest and most durable in the WORLD - you can sharpen up to 77,000 knives (depending on the Grit size) with one bar!

For Example:

   A lot of people make mistake between CBN-stones and Diamond:

FeedBaсk

From the previous Buyer from the USA: innuendos (1117) US $ 515.00

•      AMAZING stones  - they remove steel fast, with minimal effort. I like the fact that the abrasive is bonded in metal (copper + tin) and will resist dishing a lot better than resin (Note from seller: ONLY PDTools, Ukraine CAN PRODUCE the CBN-stone IN THE COPPER+TIN BOILING LAVA IN THE WORLD IN NOWADAY! 😊). I have sharpened 3 knives and for D2 steel I only needed up to the 650 Grit to produce a razor's edge - google "PDT CBN Stones" (Note from seller: PDTools, Ukraine CBN-stone😊) and watch video or search title at YouTube. These left my cheaper diamond stones in the dust. This seller is very knowledgeable and stands behind his products. A great seller!

The EXPERT Set / 25mm – CBN sharpen/honing stone Edge Pro Ruixin TSPROF Hapstone (# 175387035682)

FeedBaсk

From the previous Buyer from the USA: reno_raines99_5 (84) US $ 515.00

•     I've had these for a week now and they are the best diamond stones (Note from seller: This is the CBN-stone😊) I have tried. They are expensive and may not be for everyone but if you are someone who does a lot of sharpening and doesn't want to keep replacing the diamond stones or just wants the best product then this is for you.

The EXPERT Set / 25mm – CBN sharpen/honing stone Edge Pro Ruixin TSPROF Hapstone (#175387035682)

   Additionally:

   Diamond contains carbon, and all steel contains carbon. That is, when you are sharpening with diamonds, carbon sharpens carbon, which is not the best way to process steel. Only CBN (Cubic Boron Nitride) does not contain carbon and it is close to diamonds in hardness! Thus, there is no MATERIAL BETTER than CBN yet 😊!
P.S.
   These bars will be inherited by your grandchildren, for sure  - we have NO DOUBT about this, and IN ADDITION no lubricants or coolants are required during the sharpening - your desktop will always be clean. 😊

https://youtu.be/qtsX5jxz6g8 (Example FOR EUROPE MARKET. Not for selling)

😊 Cubic Boron Nitride (CBN) is second only to diamond in hardness, BUT two times that of diamond in high temperature resistance, four times that of traditional abrasive in wear resistance, and have extraordinary thermal conductivity. It is designed for fine grinding and polishing in a variety of demanding surface finishing, such as metal bond grinding wheels, resin bond grinding wheels, vitrified bond wheels and electroplated products.

😊 Only we – PrJSC Poltava Diamond Tools, Ukraine – makes CBN by metallic (Copper + Tin) bonded in the sharpening stones

F325 grit (50/40 μm) CBN sharpening/honing stones 150-25-7-3 to Edge Pro Ruixin TSPROF Hapstone (see on 2:09 minutes on video: https://youtu.be/RAy8olk8cMo)

About this item:

·        325 grit – U.S. Standard ANSI

·        CBN sharpening stones, Poltava, working surface: 

·        5 29/32" x 63/64" x 1/8"

·        (150 x 25 x 3 mm) 

·        Length:     150 mm = 5.91 inches 

·        Width:         25 mm = 0.98 inches 

·        Thickness:   3 mm = 0.12 inches 

·        REMEMBER – It was mounted to aluminum plate: 160x25x4 mm

·        Material: CBN - cubic boron nitride. It has the best cost/productivity ratio for processing of STEEL, comparing to diamond and cheaper stones. 

·        CBN is a generic name, there are also other names of this material, depending on manufacturer: Borazon, Elbor.  

 ·        CBN stones are similar in qualities to Japanese whetstones but have had ten times longer working life.

·        CBN can be used without lubricants

·        Compatible with Edge Pro, RUIXIN, TSPROF, Hapstone etc.

·        Durable metallic bonding (Copper + Tin)

·        Working surface: 150 x 25 x 3 mm (5 29/32" x 63/64" x 1/8"), mounted on 4 mm aluminum blank

·        Sharpening stones overall dimensions (with aluminum blank): 160 x 25 x 7 mm (6 19/64" x 63/64" x 9/32")

Attention:

Warning:  PDTools trademarks on the back of the 5/32” = 4 mm (!) Hight aluminum blank can guarantee that you have purchased a PJSC Poltava Diamond Tools Super abrasives factory’s product for the American market from an authorized dealer in North America (See the photo) !

·         What is PDT means, it printed on the sharpening blanks?

The PDT is an abbreviation for the name of the "Poltava Diamond Tools" plant in Ukraine - the manufacturer of these sharpening blanks made from CBN: https://youtu.be/lOcRcQfGYMk .

        Please, note that if there are any problems with your order, contact us first via eBay giving full details of any problem along with your user ID - Before leaving any Negative or Neutral feedback please reach out to us, we will resolve the issue as quickly as possible :-).

CBN sharpening stones

An analog of diamond bars that allow you to get a mirror edge are bars of boron nitride (CBN). Cubic boron nitride is a synthetic material that is close to diamond in hardness but has higher heat resistance. It is a chemical compound of two elements — boron (43.6%) and nitrogen (56.4%) and has a crystal lattice with almost the same structure and parameters as diamond. CBN bars are produced on metal bonds, which are based on copper and tin compounds, as well as on an organic bond (Bakelite) based on phenol-formaldehyde resin (We do not recommend this Bakelite bond as its use increases the likelihood of cancer and is not recommended for sale in the state of California). At the same time, it should be noted that CBN bars on a metal bond, despite their hardness, are able to give the secondary bevel a clean mirror surface. However, as with diamond polishing, this will take quite a long time. The 3/2 μm (F 5`000) bar already gives excellent results, and the 2/1 μm (F 10`000) bar guarantees a clean and even mirror.

Metallic CBN can be used without lubricants.

Metallic CBN stones may have tone imperfections. Metallic CBN may become darker over time due to natural metal oxidizing, it does not affect the sharpening.

Metallic CBN stones do not require any preparations.