This display is a great way to add a small, colourful and bright display to any project.
Since the display uses 4-wire SPI to communicate and has its own pixel-addressable frame buffer, it requires little memory and only a few pins.
This makes it ideal for use with small microcontrollers.
The 0.96" display has 80x160 colour pixels.
The module has an ultra-low-dropout 3.3V regulator and a 3/5V level shifter so you can use it with 3.3V or 5V power and logic.
Please note, Vcc must be supplied with 5V.
Genuinely tested before shipping.
Resources:
Arduino libraries - Install 'Adafruit ST7735 and ST7739' library via Arduino IDE library manager.
Connection (graphicstest.ino sketch): Arduino | TFT |
D8 | GND |
5V | VCC |
D13 (SCK) | SCL |
D11 (MOSI) | SDA |
D9 | RES |
D8 | DC |
D10 | CS |
*Backlight control | BLK |
for MEGA2560 D51(MOSI), D52(SCK) |
1x 0.96" 80x160 TFT LCD Display Module
1x 8-wire DuPont cable. Please specify Male to Female (default), Male to Male or Female to Female. (Type subject to availability, and may consists of two or three sections).
Important Note:
Our goal is to achieve 5-star rating for each transaction.
If you are not 100% satisfied, PLEASE do not leave a neutral or negative feedback but contact us by eBay message or email first so that we can help you.
Postage
Payment