NC mode - (locked while supplied with power), fail safe mode
LED Indicates the door Status
Suitable For: Wooden door, Glass door, Metal door, Fireproof door
Collinear Load Test 280kg / 600pounds
Dual Voltage 12 or 24 VDC (Optional)
The Standard Voltage is 12VDC when Finished
Output Contact: NO/NC/COM
MOV Provides Reverse Current Protection
Anti-Residual Magnetism Designed
High Strength Material,Anodized Aluminum Housing
Design without Mechanical Failure
Increase the holding Force,Dual Isolative Housing
Specification
Size (LxWxH): 250x48.8x27.9(mm) / 9-27/32" x 1-59/64" x 1-3/32"
Armature Plate Dimension (LxWxH): 180x38.8x13(mm) / 7-3/32" x 1-17/32" x 33/64"
Holding Force: 280kg / 600Lbs
Input Voltage: 12 or 24VDC
Current Draw: 12V/520mA or 24V/260mA
LED: Red shows locked; Green shows unlocked
Signal Output: Lock signal (NO/NC/COM)
Suitable: Wooden door, Glass door, Metal door, Fireproof door
Surface Temp: Less than +50℃ / 122℉
Operating Temp: -10℃~+55℃ (14℉-131℉)
Humidity: 0~90%(non-condensing)
Cover Finish: Anodized aluminum
Lock Finish: Zinc
Armature Plate Finish: Zinc
Thickness of door leaf: 50mm
Product: Weight: 1.95KG / 4.3lb
Caution
The screw of armature plate should not be fixed too tight. Proper elasticity should be guraranteed for the rubber ring so that the armature plate can adjust itself to the appropriate position.
Please keep the surface of the lock clean, or the force will be reduced because of the dust, glue or scotch tape on it.
Dual Voltage 12 or 24 VDC (optional)
The Standard Voltage is 12VDC when Finished.
Check the jumper's position before connection. Figure out it represents 12VDC or 24VDC
Installation
12VDC Input
Connect the positive (+) lead from a 12VDC power source to V+; Connect the ground (-) lead from a 12DDC power source to V-; Check jumper for 12VDC operation.
24VDC Input
Connect the positive (+) lead from a 24VDC power source to V+; Connect the ground (-) lead from a 24DDC power source to V-; Check jumper for 24VDC operation.
Note
"I" Bracket designed for the door frame is too thick
"L" bracket for outward door when the header is narrow
"ZL" bracket for inward door application
"U" Bracket specially designed for glass door solution.