Kings 12" Number Plate Light Bar + Plug N Play Smart Wiring Harness Kit
Kings Smart Harness | Plug n Play Spotlight Wiring Harness
EASY DIY INSTALL
FRONT OR BACK
First fit the Kings LED Light Bar up to the bracket with the included stainless steel bolts and nuts. Then, unscrew your vehicle numberplate, fit up the mounting plate and replace the numberplate over the top. In most cases you can re-use the same mounting hardware but in some instances longer ones may be required. With the number plate and bracket mounted securely, you’re done!
A HUGE LIGHTING UPGRADE
FOR ANY VEHICLE
With a whopping 4013 Lumens, this compact design certainly packs a punch. Unlike other lightbars, the Adventure Kings 12” Numberplate LED Light Bar has been lab tested and outputs a genuine 1 LUX at 377 Metres.
BUILT TOUGH
IP67 WATERPROOF RATING
Featuring a polycarbonate lens, tough alloy housing and an IP67 dust and waterproof rating, this Light Bar is built to go the distance. The Adventure Kings 12” Numberplate LED Light Bar is the night-driving lighting solution you’ve been waiting for.
DIMENSIONS
Kings Smart Harness Plug n Play Spotlight Wiring Harness Easy DIY Install Deutsch plugs
Included in the kit are HB3 & H4 headlight adapters to suit most popular makes & models.
Take the stress out of wiring Driving Lights or LED Light Bars to your vehicle.
The Adventure Kings Plug N Play Wiring Harness solves all your wiring needs in one easy to install kit.
Solving the age-old problem of trying to figure out if your vehicle is positively or negatively switched, the Plug N Play does the work for you!
Directing power where it is needed straight out of the box, the kit allows you to have your lights installed and up & running in no time.
Utilising thick 12AWG (3.31mm²) wire, the Plug N play will efficiently deliver power into your Adventure Kings Driving Lights or LED Light Bar – allowing you to take full advantage of the HUGE amount of light they emit.
Protected by a replaceable in-line blade fuse along with weather and heat resistant cable protectors, which easily connect directly to your lights using waterproof Deutsch plugs. This wiring kit was designed for the rough & tough of Australian 4WDing, from scorching deserts to treacherous water crossings.
Connecting to a flush mounted switch, which conveniently mounts inside the cab, you’ll have full control of your lights right from the driver’s seat.
"Kings 12” Numberplate LED Light Bar | Easy DIY Install | Suits All Vehicle Types
LED TYPE | 12xLEDs |
LUMENS | 4013 |
LUX | 1 lux at 377 metres |
VOLTAGE | 12V / 24V |
AMP DRAW | 3.72 Amps at 14.4V |
POWER DRAW | 54 Watts |
IP PROTECTION | IP67 |
COLOUR TEMPERATURE | 6060K |
HOUSING MATERIAL | Die-Cast Aluminium |
LENS MATERIAL | Polycarbonate |
CONNECTOR | 2 Pin Deutsche-type (400mm cable length) |
MOUNT | Powder coated Steel Mounting Plate |
LIGHT BAR DIMENSIONS | 341mm (L) x 42mm (H) x 50mm (D) |
BRACKET DIMENSIONS | 370mm (L) x 75mm (H) (115mm high at mounting tabs) |
WEIGHT | 1.1kg |
WARRANTY | 12 months |
Kings Smart Harness | Plug n Play Spotlight Wiring Harness | Easy DIY Install | Deutsch plugs
Live wire gauge: |
12AWG |
Relay to Deutsch plug: |
2700mm |
Relay to trigger (headlight): |
2000mm |
Relay to switch: |
2650mm |
Single to Double Splitter: |
1000mm |
Fuse: |
25A |
Relay: |
40A |