Description：

This Equipment Applicable to European, American and Asian car models：

Adjustable pulse oil change, which can effectively clean the pipeline and change the oil more thoroughly.
Powerful recovery function, it can quickly recover used brake fluid at the same time.The air inlet port has a water separating and filtering device, which can separate the moisture in the air, avoid it mixing with the oil, and ensure the quality. 

Features：

1.Dual Pressure Mode

• Built-in pressure monitoring device, if pressure cannot be built or air is sucked in by the cylinder, disconnect the cylinder to prevent air from entering the vehicle's brake fluid container.
• Standard mode 1.5-2.0 bar (5 minutes)
• Fast mode 2.0-2.5 bar (3 minute).

3.With 1L Capacity Filling Bottle

• Equipped with a 1L capacity corrosion-resistant filling bottle
• For storing new brake fluid
• It is corrosion-resistance, durable and long-lasting

4.Unique Design

• The design of this product is very compact
• With handle, easy to carry
• With a hook on the side of the product for placing the filling hose
• Equipped with a pressure gauge on the front of the product, you can see the working pressure at any time

5.Widely Application

• Come with 7 various types of adapters
• AST609 brake oil fluid bleeder kit apply for many types of cars, such as European, American and Asian model vehicles
• Compatible with Mercedes-Benz, BMW, Audi, VW, Skoda, Volvo, Land Rover, Jaguar, Porsche, Buick, Ford, Chery, Honda, Jeep Series, Nissan Series and so on.

Parameter：

Operate Steps：

Step 1: Pour new brake fluid into the flling bottle
Step 2: Connect the suction hose and pressure balance hose to the filling bottle.
Step 3: Connect the filling hose to the brake fluid cylinder via the adapter.
Step 4: Connect the recovery bottle to the brake fluid sub-cylinder.
Step 5: Select standard mode or master mode. One-button start, then wait for the fluid exchange to be completed.

Note: no need to start the vehicle for the operation.
 1. Raise the car to a suitable height so the drive wheels are not on the ground.
 2. Connect the four oil pots of the device to the car brake cylinder, and loosen the exhaust screw of the brake cylinder to ensure that oil flows out.
 3. Pour in 2L new brake fluid from the fuel filler port of the equipment, and find the matching model connector to connect to the fuel filler of the brake master cylinder.
 4. Connect to 12V car power and turn on the power switch button.
 5. Press the Vacuum Switch button.
 6. Press the Fuel Switch button to change the brake fluid.
 7. During the oil changing process, look at the car brake oil tank mouth, if the refuel is too slow, press the acceleration switch button on the device to accelerate refueling; if it’s too fast, press the deceleration switch button to slow down.
 8. After the oil change is completed, the used oil in the tank of the equipment must be drained clean. If it’s not emptied clean, the vacuum pump will be damaged and the oil change operation cannot be performed. 

Package Includes：

1* AUTOOL AST609 Pulsating Brake Fluid Exchanger Main Unit
1* Power cord 
1*Adapters set 
1* New fluid bottle
1* Old fluid bottle
2* Clips
1* Transformer
1* User manual