AUTOOL CT500 have 15 injector-specific functions
1. Ultrasonic cleaning: It sends signals to the injectors through the pulse signal line, using the cleaning fluid with the ultrasonic vibration so as to completely remove the carbon and impurities inside the injectors.
2. Idle speed test (0-20ms): Simulate the engine idling speed and test the state of the fuel injector.
3. Medium speed test (0-7.5ms): simulate the engine running at medium speed and test the state of the fuel injector.
4. High-speed test (0-4ms): Simulate the high-speed performance of the engine and test the state of the fuel injector.
5. Acceleration test: Simulate the acceleration state of the car and test the performance of the fuel injector.
6. Variable Speed Test: Simulate the variable Speed of the car and test the working performance of the fuel injector.
7. Leak Test: Test the sealing condition of the fuel injector.
8. Idle dpeed sprayability Test: Simulate the engine idling state and test the spraying performance of the fuel injector.
9. Medium speed sprayability test: Simulate the engine medium-speed state and test the spraying performance of the fuel injector.
10. High-speed sprayability test: Simulate the high-speed state of the engine and test the spraying performance of the fuel injector.
11. Flow Balance Test: The flow balance test shall be carried out at different speeds.
12. Observation of Fuel Injection Shape: Observe whether the fuel injection shapes and angles of all fuel injection nozzles on the same car are uniform at various speeds.
13. Reverse flush: Reverse flush is a way to clean the injectors with the test liquid flowing from the outlet to the inlet of the injector. Reverse flush may remove the dirt inside the injector or the injector Strainer (Only for the top fuel supply injector).
14. Leak Detection Test : The leak detection test is to detect the tightness of the injector needle valve under the high pressure of the system.
15. No-disassembly cleaning: Direct cleaning without disassembling the injectors, this function is an additional function, which requires special adapters.
COMPATIBLE WITH VARIOUS INJEGTOR TYPES It provides 12V, 70V and 120V voltage options, and can drive common fuel injectors as well as other types such as GDI EFI, and FSI injectors.It covers most of the core brand vehicles' fuel injectors in Europe, America, and Asia. | SIX-GYLINDER DESIGN This tool can clean and test up to six fuel injectors simultaneously, providing efficient service. It allows for easy observation and accurate evaluation of the injectors' condition through comparison The graduated cylinder has a 110ml capacity. | LARGE CLEANING TANK With a 2000ml capacity ultrasonic cleaning tank, it can fully clean large fuel injectors. Internal cleaning Or surface cleaning |
SMART CONTROL PANEL The CT500 design with HD color display, makes the operation clear and easy to read. | COMES WITH VARIOUS CONNECTORS It has replaceable composite joints suitable for a variety of vehicle types. It covers most of the core brand vehicles' fuel injectors in Europe, America, and Asia. | PRACTICAL DRAWER DESIGN It has a convenient drawer at the bottom for storing various components, with labeled compartments for eas organization and access. |
