The performance of the CB LEMM MiniTurbo 1002 PL antenna is closely related to the technical characteristics of the antenna in ideal mounting and use conditions: SWR <= 1.1: 1.3, maximum applied power 200 W, impedance 50 Ohm, 2dBi gain, stainless steel.
Communication distance is another decisive factor in the acquisition and use of a CB antenna. Thus, the communication distance of over 10 km is reached in ideal working conditions: calibrated antenna, open field without obstacles, the station with the maximum legally allowed power of 4W and with a standard reception. Any obstacle such as: hills, mountains, buildings, walls can reduce this distance.
Antenna length is another very important factor that can influence the communication distance in traffic. Thus, the longer the antenna, the longer the range. LEMM MiniTurbo 1002 PL has a length of 107 cm.
CB LEMM MiniTurbo 1002 PL antenna can be mounted on a magnetic base with PL type thread or on a fixed support (not included) on both cars and trucks.
LEMM products are made in Italy and their production is made of high quality materials with high durability.
| General characteristics |
| Working frequency | 26.5 - 27.5 MHz |
| Maximum power applied | 200W |
| Minimum SWR in the center of the band | 1.1- 1.3 |
| Length | 107 cm |
| Impedance | 50 Ohm |
| Material | Stainless steel |
| Connector tip | PL259 |
| Hole diameter (mm) | 16 mm |
| Weight | 0.5 kg |
|
|
Gain
| 2 dB |
| Polarization | vertically |
| Working distance | 10 km |
| Magnetic base | is not included |
| Operating temperature | -26 ~ + 55 ° C |
| tiltable | Yes, up to 90 degrees |