Is the tailgate light bar suitable for your truck?
Tailgate light bar work on any vehicle with at least a 60 inch tailgate and a standard 4 pin (3 and 1) wiring harness. The extra wire is the reverse light and needs to be spliced in separately.Suitable for 12v car and pickup truck.like Tundra ,Sierra,Silverado,Ram Pickup,Titan etc.
Universal 4pin plug assembly and wire it into vehicles existing wiring harness.If your truck is not 4-pin plug assembly,look for an extra adapter to 4 pin.For example, if the truck is 7-pin, you need a "7 to 4" adapter.
60" Tailgate Light Bar, Triple Row 432 LED Strip Lights for Cars 5 Function Running,Brake,Reverse,Sequential Amber Turn Signal, Double Flashing Lights, No Drill Install IP65 Waterproof
About this item:
【Super Bright】: Tailgate Light bar triple row with 432pcs 3528/1210 SMD LED chips design which makes the lumen output is 300% brighter than one or double row LED tailgate lighting bars on cars.Adds a clear visibility to the rear drivers, better ensuring your security on roads.Suitable for 12v car and pickup truck.like Tundra ,Sierra,Silverado,Ram Pickup,Titan etc.
【Full Functions】: Red for DRL and Brake, White for Reverse Lights,Amber for Flow Turn Signal and Double Flash . Everyone behind you exactly knows what's your next step!
【Note】: It should be noted that the light strip can only convey "one message" to the rear vehicle at the same time. Like how the brakes and turn signals change,when braking, the turn signal will stop working, when you let up on the brake the turn signal will continue.
【Waterproof & All Weather Suitable】: Strong self-adhesive tape tape and well conductive standard 4-pin flat plug can easily stuck on where you need.The LED Tailgate Light Bar with IP65 waterproof rate ,works good whatever in rainy or snowy days.
【EASY INSTALL 】No Drill Install. Well conductive standard 4-pin flat plug.Simple installation with User Manual.If you encounter an unsuitable situation, you can try to go to the nearest car repair shop for decoding adaptation. Some car models need to be decoded before they can be used normally.(Reverse light may require wiring)
【UNIVERSAL FITMENT 】With working voltage range of DC 12V , the running board lights fits for on most vehicles. Such as Dodge Ram 1500 2500, 3500, 4500, For-d F Series 150, 250, Silverado, GMC, Sierra and most cars, trucks, Pickup, SUV, RV, Van, trailers, etc.
Product Parameters:
Material: SMD LEDs+Silicone
Voltage: DC-12V
Wattage: 36W
Dimension: 60"L x 0.63"W x 0.5"H
LED Type: 3528/1210 SMD (Two kinds of LED lamp beads)
Led Number: 432 LED (144pcs Red SMD + 144pcs White SMD + 144pcs Amber SMD)
LED Color: Red for DRL and Brake, White for Reverse Lights,Amber for Flow Turn Signal and Double Flash .
Working TEMP: -20° F - 150° F
Waterproof Rate: IP65
Lampholder Interface: Standard 4 PIN connector
Light Angle: 180°
Waterproof Mode: Epoxy waterproof
Product Description:
1. Fit for most trucks, pickup, SUVs, jeeps and RV;
2. Enhance safety with higher visibility and reduce accidents in bad weather, chance of rear-end collision;
3. Flexible, soft design, waterproof and shockproof;
4. Extremely long LED life and low power consumption;
5. Comes with mounting plates and tape for installation, easy plug & play;
6. Constant LED drive, with overload protection, short circuit protection and over temperature protection.
Six Functions:
1. Running mode, all red LEDs light up(dipped beam)
2. Brake mode, all Red LEDs light up(high beam)
3. Reverse mode, all White LEDs light up
4. Turn left mode, left Amber LEDs sequentially light up
5. Turn right mode, right Amber LEDs sequentially light up
General Installation Information:
1. It is recommended that you test the bar for full functionality before mounting.
2. Unhinge and remove your tailgate.
3. Clean the area thoroughly. Any dirt or dust can reduce the strength of the adhesive
4. If you afraid it may be fall off,you can buy Adhesive Booster at your local and Prime the area with it.
5. Peel off the red protective film from the tape side of the bar
6. Apply the bar left to right, pressing firmly every 12 LEDs for 30 seconds.
7. Finally, test your lights one last time to make sure no wires came loose during installation.
Note:
Professional installation is highly recommended (No instruction included),
Due to the lighting and screen settings, the real color may slightly different from the picture.
Note: This led strip only performs one function. When both brake and turn signal are applied, only the brake light on the LED strip is turned on. The turn signal will start functioning until the brake is released.
Package Include:
1pc * 60" LED Strip Tailgate Light
Running/Brake LightsWhen running/brake, the red lights will be on | Turn SignalsWhen you turn left, the amber light will be on from the middle to the left; When you turn right, the amber light will be on from the middle to the right | Reversing LightsWhen you reverse, the white lights will be on |
PeelAfter cleaning and drying the mounting surface, peel off the adhesive tape on the back of light strip | StickAccording to the mounting direction of the wire bundle, stick the light bar to the recessed area between the bottom of the tailgate and the bumper shelf | Electrical Hook-upPlug and play the standard flat 4-pin connectors, connect the reverse wire to a 12V DC positive power source |
【Service Guarantee】Thanks for visiting our Store! We try to accurately describe our item to the best of our knowledge, if there is any incorrect, please feel free to let us know via message.
If you have any problem or concerns,we hope you can contact us via message,before you decide to leave neutral or negative feedback or open return request or case. When we see your email at work, we will reply to you as soon as possible.
1.Dear buyers, we appreciate your business, if you are satisfied with our service,
2.Please leave us a positive feedback and rate the details of the transaction (Detailed Seller Ratings) with a "PERFECT 5 Star.
Length | 60 in |
---|---|
Voltage | DC-12V |
Manufacturer Part Number | 60'' LED Tailgate Light Bar |
Placement on Vehicle | Rear |
Brand | Unbrand |
Material | SMD LEDs+Silicone |
Type | LED Tailgate light bar |
Dimension | 60"L x 0.63"W x 0.5"H |
LED Type | 3528/1210 SMD |
Led Number | 432 LED SMD(144 Red+144 White+144 Amber) |
Working TEMP | -20° F - 150° F |
Waterproof Rate | IP65 |
Lampholder Interface | Standard 4 PIN connector |
Light Angle | 180° |
Waterproof Mode | Epoxy waterproof |
Features | Easy To Install, Waterproof |
Wattage | 36W |
Five Functions | Running/Brake/Reverse/Turn Left/Turn Right Mode |
Items Included | 1PCS 60IN Truck Tailgate LED Light Bar |
Model | Truck Tailgate LED Light Bar |
OE/OEM Part Number | 60INCH Truck Tailgate LED Light Bar |
Interchange Part Number | Car Truck Tailgate LED Light Bar |
Manufacturer Warranty | 6 Months |