Yacco GEARBOX RACE Synthetic Oil 2 and 4 Stroke Motorcycle 1L Premium French Oil

MTM Stainless Steel 3/8" Pressure Washer Hose Reel | 75' and 100'Inlet on rear is 3/8" Male(where you inlet jumper hose connects)


These Hose reels are hot water rated up 215°F and boast anti corrosion components with a high performance stainless swivel. Hardware is not included for mounting as this is specific to your mounting requirements

Simply slide the swivel end of your Kobrajet hose through the opening provided at the side of the reel core and install the 3/8" Male NPT threads into the 3/8" Female NPT threads of the swivel. Do not make a Quick Coupling joint at the swivel as there is not enough space and the bend in the line is too severe. Be sure to allow a small amount of slack at the swivel joint and use the red hose fastener provided to secure the hose at this joint.

Using a whip line connected to your pump, connect to the 3/8" Male NPT hose reel inlet. When planning, add an extra foot to the distance of the whip line so as not to bend the whip line too severely. Lastly, install the handle with the hardware provided.

Before leaving your hose reel unattended, always engage the locking mechanism on the side of the reel.

These are entry level hose reels, they are a great product for the price but take a little bit of work and some other parts to set them up properly. Here is how we suggest setting these up:

The outlet for your high pressure hose is on the side and is 3/8" female. Our Kobrajet hoses with bare 3/8" male ends will connect here, we do not suggest using quick connects for this connection point.

We do HIGHLY RECCOMEND you get one of these elbow to make this connection easier: 

Cox Reels Steel 90 Degree Elbow | 3/8" Male to Female NPT

The inlet is on the back of the reel and 3/8" Male. We suggest installing one of these plugs on it:

MTM Quick Connect Plug 3/8" Female | Stainless Steel

This is where you would connect one of our jumper hoses from your pressure washer to the reel, in the length that works best for you.

You can find them here: Jumper Hoses/Whip Lines 

We suggest installing these 3/8" coupler on both ends of your jumper hose:

MTM 3/8" Female Quick Connect Coupler | Stainless Steel

The last piece you would need is a quick connect plug for the outlet of your pressure washer, we have these available in M22 14 and 15 sizes.

Return Policy

Brand new items in the original packaging can be returned within 14 days of purchase for any reason. Because we offer the lowest allowable advertised price and shipping on our items a 15% restock fee will be charged on all returned items and the buyer will be responsible for the return shipping.

Fluids can only be returned in unopened condition. If the factory seal has been broken the item can not be returned.

All returned items will be inspected, used/installed items or items not in factory packaging will be declined. Fluids that the factory seal is opened on will be declined.

Store Policies

The Clean Garage does not manufacturer or warranty any of the items listed. All products are warrantied orby the manufacturer, if you should encounter any concerns or warranty issues with the products purchased please contact us by message  and we will assist you in having the manufacturer address your concern.

We only remove items from inventory if they are discontinued. If there is a delay in the item you ordered we will contact your promptly with an updated time frame and offer to back order the item or issue a complete refund. We suggest you always contact us before purchase to verify fitment and current stock for the item you are interested in to avoid delays. 

Items may be drop shipped direct from the manufacturer, this may cause additional shipping time depending on where you are located and where the nearest warehouse that has your items in stock is located. If you need your items by a certain time we suggest you always contact us before to verify current shipping location and time. 

Items pictured may be a "stock image" meaning they may not be the exact size of the items listed. This can alter the appearance of the product you receive (for example the lip size of the wheel or package size of your Fluids) We do our best to post the most accurate image available from the manufacturer, if you have a question about the specific appearance of the item you are ordering please message or email us before ordering. 

The items we sell should always be installed by a trained professional and should be verified with them before ordering. Always consult your vehicles owners manual for the proper fluid to use.

As you can tell by now the best practice is to contact us before if you order if you have any questions about fitment, availability, shipping times or anything else. Our goal is to make sure you are 100% satisfied with the complete order process and communication is the best way to do that. Thank you for considering making you purchase with us, we appreciate your business!

Please make sure you check out our complete line of products including the best selection of Premium Car Care Products, Synthetic Oils, Custom Wheels, Automotive Lifestyle Apparel and Performance Parts!