Head Gasket Repair for Jaguar. Cooling System Seal Liquid Steel
Head Gasket Repair for Jaguar. Cooling System Seal Liquid Steel
You can now repair your vehicles head gasket yourself, quick, easy, cost affective and perminent
Does your vehicle have a blown head gasket? Does have any of the following symptoms?:
- Loosing coolant or water and having to top up often?
- Oil and water mixing?
- Pressure in the cooling system?
- Steam / smoke from the exhaust?
If so then read on.....
Advances in chemical science mean, if your vehicle has a blown head gasket, you can now easily "repair it yourself" by simply pouring hyper-seal liquid formula in the radiator or expansion tank of your vehicle for a fast & permanent repair, saving you hundreds of pounds in garage bills!
Hyper-Seal liquid metal 'Permanently Repairs: -
- Blown head gaskets and cylinder heads
- stops leaks in radiators, engine blocks, heater matrix and core plugs
When your vehicles head gasket is blown, there is usually a very small crack, therefore you may start to lose water or oil and water start to mix resulting in the car to overheat. you simply addhyper-seal to the radiator or expansion tank and idle the engine over 2000 revs, for 10 - 15 minutes. once hyper-seal is added it will fill cracks and holes with its micro-copper fibers forming a weld.
hyper-seal works by chemical reaction to form a weld when exposed to cracks and leaks
repairs blown head gaskets and other leaks within minutes
the welded area turns to metal and remains heat resistant upto 300 degrees
hyper-seal can be used in the cooling system with or without anti-freeze
will not block the cooling system
remember its not a temporary repair, its permanent; good for the life of the engine.
a garage bill? 400 to 600 pounds to repair a head gasket. one bottle of hyper-seal does the same repair! one bottle is usually sufficient per vehicle, however bigger engines v8 and v12 will require 2 bottles.
if your vehicle suddenly starts losing water through a leaking radiator or head gasket and begins to overheat what would you do? maybe on the motorway? a day or a night out? hyper-seal will provide you with an emergency and permanent repair and get you on the road again. purchase yours today - you never know when you will need it ! trade enquiries welcome.
Directions (please also read on reverse of the bottle)
before use, ensure water is circulating freely - if in doubt remove thermostat.
add hyper-seal to radiator or expansion tank - do not overfill with water.
gradually idle engine at approx 2000 rpm for 10 - 15 minutes.
leak will stop within 5 minutes after engine reaches normal temperature.
hyper-seal can be left in engine to seal future leaks or can be drained out.
NOTE: Although hyper seal has a very high success rate there are occasions when it does not work as the engine will have sustained to much damage
you must appreciate before buying that this item. This product does not come with a money back gaurentee
